- 密度 [g/cm3]: 1.88
- 吸水率 [%]: 0.1
- 缺口冲击强度: 0.24
- 弯曲强度 [MPa]: 55.0
- 弯曲模量 [MPa]: 16.9
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Bulk Density | 0.875 g/cc | 0.0316 lb/in³ | Powder; ASTM D1895 | ||
| Density | 1.88 g/cc | 0.0679 lb/in³ | ASTM D-792 | ||
| Water Absorption | 0.10 % | 0.10 % | 24 hour; ASTM D570 | ||
| 0.15 % | 0.15 % | 48 hour; ASTM D570 | |||
| Linear Mold Shrinkage | 0.0020 cm/cm | 0.0020 in/in | ASTM D955 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell E | 110 | 110 | ASTM D785 | ||
| Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ASTM D638 | ||
| Flexural Strength | 100 MPa | 14500 psi | ASTM D790 | ||
| Flexural Modulus | 16.9 GPa | 2450 ksi | ASTM D790 | ||
| Compressive Strength | 262 MPa | 38000 psi | ASTM D695 | ||
| Izod Impact, Notched | 0.240 J/cm | 0.450 ft-lb/in | ASTM D256A | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Constant | 4.5 @Frequency 1e+6 Hz | 4.5 @Frequency 1e+6 Hz | Wet; ASTM D150 | ||
| Dielectric Strength | 10.0 kV/mm | 254 kV/in | 60 Hz, wet, SS; ASTM D149 | ||
| 12.0 kV/mm | 305 kV/in | ST; ASTM D149 | |||
| Dissipation Factor | 0.020 @Frequency 1e+6 Hz | 0.020 @Frequency 1e+6 Hz | wet; ASTM D150 | ||
| Arc Resistance | 180 sec | 180 sec | ASTM D495 | ||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear, Parallel to Flow | 14.0 µm/m-°C @Temperature 20.0 °C | 7.78 µin/in-°F @Temperature 68.0 °F | ASTM E831 | ||
| Thermal Conductivity | 0.540 W/m-K | 3.75 BTU-in/hr-ft²-°F | ASTM C518 | ||
| Maximum Service Temperature, Air | 150 °C | 302 °F | UL Temperature Index; UL 746B | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 185 °C | 365 °F | As Molded; ASTM D648A | ||
| >= 282 °C | >= 540 °F | Post Baked; ASTM D648A | |||
| Flammability, UL94 | V-0 @Thickness 1.60 mm | V-0 @Thickness 0.0630 in | |||
| V-0 @Thickness 3.20 mm | V-0 @Thickness 0.126 in | ||||
| Descriptive Properties | |||||
| Available Molding Grades | Compression, Transfer, Injection | ||||
| Color | Black, Green | ||||
| Form | Granular | ||||