| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.70 - 2.20 g/cc | 1.70 - 2.20 g/cc | ASTM D792 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 60 - 80 | 60 - 80 | ASTM D2240 | ||
| Tensile Strength | >= 1.38 MPa | >= 200 psi | ASTM D412 | ||
| Elongation at Break | <= 200 % | <= 200 % | ASTM D412 | ||
| Tear Strength | <= 9.64 kN/m | <= 55.0 pli | ASTM D624 | ||
| Compression Set | <= 35 % @Temperature 100 °C, Time 252000 sec | <= 35 % @Temperature 212 °F, Time 70.0 hour | ASTM D395, Method B | ||
| Electrical Properties | Metric | English | Comments | ||
| Volume Resistivity | <= 0.50 ohm-cm | <= 0.50 ohm-cm | without pressure-sensitive adhesive; MIL-DTL-83528 | ||
| Shielding Effectiveness | >= 75 dB @Frequency 1.00e+8 Hz | >= 75 dB @Frequency 1.00e+8 Hz | E-Field; Method 3, CHO-TM-TP09 | ||
| >= 85 dB @Frequency 1.00e+10 Hz | >= 85 dB @Frequency 1.00e+10 Hz | Plane Wave; Method 3, CHO-TM-TP09 | |||
| >= 105 dB @Frequency 2.00e+9 Hz | >= 105 dB @Frequency 2.00e+9 Hz | Plane Wave; Method 3, CHO-TM-TP09 | |||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 100 °C | 212 °F | |||
| Descriptive Properties | |||||
| Binder | EPDM | ||||
| Filler | Ni/C | ||||
| Heat Aging | <0.35 ohm-cm | MIL-DTL-83528 Para. 4.6.15 | |||
