- 密度 [g/cm3]: 1.7
- 缺口冲击强度: 0.9
- 弯曲强度 [MPa]: 170.0
- 弯曲模量 [MPa]: 12.7
- 硬度: 118.0
- 热变形温度 [℃]: 242.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Density | 1.70 g/cc | 0.0614 lb/in³ | ISO 1183 | ||
| Viscosity Measurement | 0.52 | 0.52 | Inherent Viscosity | ||
| Linear Mold Shrinkage | 0.0020 cm/cm | 0.0020 in/in | ASTM Data; MD | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Rockwell R | 118 | 118 | ASTM Test | ||
| Tensile Strength at Break | 170 MPa | 24700 psi | 0.2 in/min; ASTM Test | ||
| Tensile Strength, Ultimate | 170 MPa | 24700 psi | 5mm/min; ISO 527 | ||
| Elongation at Break | 2.0 % | 2.0 % | 5mm/min; ISO 527 | ||
| 2.0 % | 2.0 % | 0.2 in/min; ASTM Test | |||
| Tensile Modulus | 14.6 GPa | 2120 ksi | 1mm/min; ISO 527 | ||
| Flexural Strength | 278 MPa | 40300 psi | ASTM Test | ||
| Flexural Modulus | 12.7 GPa | 1840 ksi | ASTM Test | ||
| 12.8 GPa | 1860 ksi | ISO Data | |||
| Izod Impact, Notched | 0.900 J/cm @Thickness 3.17 mm | 1.69 ft-lb/in @Thickness 0.125 in | ASTM Test | ||
| Izod Impact, Unnotched | 8.70 J/cm | 16.3 ft-lb/in | ASTM Test | ||
| Izod Impact, Notched (ISO) | 12.0 kJ/m² | 5.71 ft-lb/in² | ISO Test | ||
| 11.5 kJ/m² @Temperature -40.0 °C | 5.47 ft-lb/in² @Temperature -40.0 °F | ISO Test | |||
| Charpy Impact, Notched | 1.15 J/cm² | 5.47 ft-lb/in² | ISO 179 | ||
| 1.40 J/cm² @Temperature -30.0 °C | 6.66 ft-lb/in² @Temperature -22.0 °F | ISO 179 | |||
| Thermal Properties | Metric | English | Comments | ||
| CTE, linear | 22.0 µm/m-°C @Temperature -30.0 - 30.0 °C | 12.2 µin/in-°F @Temperature -22.0 - 86.0 °F | ASTM Test | ||
| Melting Point | 245 °C | 473 °F | 10 K/min | ||
| 245 °C | 473 °F | ASTM Test | |||
| Deflection Temperature at 0.46 MPa (66 psi) | 242 °C | 468 °F | ISO 75 | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 220 °C | 428 °F | ISO 75 | ||
| 224 °C | 435 °F | ASTM Test | |||
| Processing Properties | Metric | English | Comments | ||
| Melt Temperature | 275 °C | 527 °F | Injection molding | ||
| Mold Temperature | 115 °C | 239 °F | Injection molding | ||
| Descriptive Properties | |||||
| Color | BK-112 | ||||
| Commercial Status | Active America | ||||
| Form | Pellets | ||||
| Impact Modified | No | ||||
| Primary Processing Technique | Injection Molding | ||||
| Processing | Injection Molding | ||||