- 密度 [g/cm3]: 1.65
- 缺口冲击强度: 1.05
- 弯曲模量 [MPa]: 12.7
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.65 g/cc | 1.65 g/cc | ASTM D792 | ||
| Density | 1.65 g/cc | 0.0596 lb/in³ | ISO 1183 | ||
| Filler Content | 36 % | 36 % | |||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength at Break | 205 MPa @Temperature 23.0 °C | 29700 psi @Temperature 73.4 °F | ISO 527 | ||
| Tensile Strength | 195 MPa @Temperature 23.0 °C | 28300 psi @Temperature 73.4 °F | ASTM D638 | ||
| Elongation at Break | 2.4 % @Temperature 23.0 °C | 2.4 % @Temperature 73.4 °F | ASTM D638 | ||
| 2.4 % @Temperature 23.0 °C | 2.4 % @Temperature 73.4 °F | ISO 527 | |||
| Tensile Modulus | 14.0 GPa @Temperature 23.0 °C | 2030 ksi @Temperature 73.4 °F | ISO 527 | ||
| Flexural Strength | 305 MPa @Temperature 23.0 °C | 44200 psi @Temperature 73.4 °F | ASTM D790 | ||
| Flexural Modulus | 12.7 GPa @Temperature 23.0 °C | 1840 ksi @Temperature 73.4 °F | ASTM D790 | ||
| Izod Impact, Notched | 1.05 J/cm @Temperature -40.0 °C | 1.97 ft-lb/in @Temperature -40.0 °F | ASTM D256 | ||
| 1.10 J/cm @Temperature 23.0 °C | 2.06 ft-lb/in @Temperature 73.4 °F | ASTM D256 | |||
| Izod Impact, Unnotched | 11.75 J/cm @Temperature 23.0 °C | 22.01 ft-lb/in @Temperature 73.4 °F | ASTM D4812 | ||
| Charpy Impact Unnotched | 6.50 J/cm² @Temperature 23.0 °C | 30.9 ft-lb/in² @Temperature 73.4 °F | ISO 179/1eU | ||
| Thermal Properties | Metric | English | Comments | ||
| Deflection Temperature at 1.8 MPa (264 psi) | 235 °C | 455 °F | ISO 75-1/-2 | ||
| 235 °C | 455 °F | ASTM D648 | |||
| Processing Properties | Metric | English | Comments | ||
| Melt Temperature | 247 °C | 477 °F | 10°C/min; ISO 11357-1/-3 | ||
| 280 - 300 °C | 536 - 572 °F | ||||
| Mold Temperature | >= 95.0 °C | >= 203 °F | |||
| Drying Temperature | 120 °C | 248 °F | |||
| Dry Time | 4.00 hour | 4.00 hour | |||
| Moisture Content | <= 0.020 % | <= 0.020 % | |||
| Descriptive Properties | |||||
| Appearance | Natural Color | ||||
| Drying Recommended | Yes | ||||
| Filler | Glass Reinforced | ||||
| Forms | Pellets | ||||
| Generic | PET | ||||
| Material Status | Preliminary Data | ||||
| Polymer Family | Polyester | ||||
| Polymer Type | PET | ||||
| Processing Method | Injection Molding | ||||
| Product Category | Glass/Mineral Reinforced Resins | ||||
| Region Available - Global | Yes | ||||
| RoHS Compliance | Contact Manufacturer | ||||