塑胶原料之家
  1. 首页
  2. 英文物性
  3. PA66
  4. DuPont Performance Polymers Zytel® 135F NC010 Nylon 66

DuPont Performance Polymers Zytel® 135F NC010 Nylon 66

DuPont Performance Polymers Zytel® 135F NC010 Nylon 66 物性表: DuPont Performance Polymers Zytel® 135F NC010 Nylon 66物性表及特性介绍,DuPont Performance Polymers Zytel® 135F NC010 Nylon 66注塑参数详情,如需DuPont Performance Polymers Zytel® 135F NC010 Nylon 66下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.14
  • 吸水率 [%]: 2.7
  • 缺口冲击强度: 2.0
  • 拉伸强度 [MPa]: 67.0
  • 硬度: 116.0
  • 热变形温度 [℃]: 210.0
 
Physical PropertiesMetricEnglishComments
Density 1.14 g/cc0.0412 lb/in³DAM; ISO 1183
Water Absorption  2.7 %
@Temperature 23.0 °C		2.7 %
@Temperature 73.4 °F		Equilibrium 50%RH; DAM; ISO 62, Similar to
 8.5 %
@Temperature 23.0 °C		8.5 %
@Temperature 73.4 °F		Saturation, immersed; DAM; ISO 62, Similar to
Viscosity  55000 cP
@Shear Rate 7000 1/s,
Temperature 315 °C		55000 cP
@Shear Rate 7000 1/s,
Temperature 599 °F		DAM; ISO 11443
 64000 cP
@Shear Rate 5000 1/s,
Temperature 315 °C		64000 cP
@Shear Rate 5000 1/s,
Temperature 599 °F		DAM; ISO 11443
 70000 cP
@Shear Rate 7000 1/s,
Temperature 295 °C		70000 cP
@Shear Rate 7000 1/s,
Temperature 563 °F		DAM; ISO 11443
 83000 cP
@Shear Rate 5000 1/s,
Temperature 295 °C		83000 cP
@Shear Rate 5000 1/s,
Temperature 563 °F		DAM; ISO 11443
 88000 cP
@Shear Rate 7000 1/s,
Temperature 275 °C		88000 cP
@Shear Rate 7000 1/s,
Temperature 527 °F		DAM; ISO 11443
 92000 cP
@Shear Rate 2000 1/s,
Temperature 315 °C		92000 cP
@Shear Rate 2000 1/s,
Temperature 599 °F		DAM; ISO 11443
 105000 cP
@Shear Rate 5000 1/s,
Temperature 275 °C		105000 cP
@Shear Rate 5000 1/s,
Temperature 527 °F		DAM; ISO 11443
 114000 cP
@Shear Rate 1000 1/s,
Temperature 315 °C		114000 cP
@Shear Rate 1000 1/s,
Temperature 599 °F		DAM; ISO 11443
 124000 cP
@Shear Rate 700 1/s,
Temperature 315 °C		124000 cP
@Shear Rate 700 1/s,
Temperature 599 °F		DAM; ISO 11443
 124000 cP
@Shear Rate 2000 1/s,
Temperature 295 °C		124000 cP
@Shear Rate 2000 1/s,
Temperature 563 °F		DAM; ISO 11443
 134000 cP
@Shear Rate 500 1/s,
Temperature 315 °C		134000 cP
@Shear Rate 500 1/s,
Temperature 599 °F		DAM; ISO 11443
 160000 cP
@Shear Rate 1000 1/s,
Temperature 295 °C		160000 cP
@Shear Rate 1000 1/s,
Temperature 563 °F		DAM; ISO 11443
 166000 cP
@Shear Rate 2000 1/s,
Temperature 275 °C		166000 cP
@Shear Rate 2000 1/s,
Temperature 527 °F		DAM; ISO 11443
 178000 cP
@Shear Rate 700 1/s,
Temperature 295 °C		178000 cP
@Shear Rate 700 1/s,
Temperature 563 °F		DAM; ISO 11443
 195000 cP
@Shear Rate 500 1/s,
Temperature 295 °C		195000 cP
@Shear Rate 500 1/s,
Temperature 563 °F		DAM; ISO 11443
 222000 cP
@Shear Rate 1000 1/s,
Temperature 275 °C		222000 cP
@Shear Rate 1000 1/s,
Temperature 527 °F		DAM; ISO 11443
 254000 cP
@Shear Rate 700 1/s,
Temperature 275 °C		254000 cP
@Shear Rate 700 1/s,
Temperature 527 °F		DAM; ISO 11443
 284000 cP
@Shear Rate 500 1/s,
Temperature 275 °C		284000 cP
@Shear Rate 500 1/s,
Temperature 527 °F		DAM; ISO 11443
Linear Mold Shrinkage, Flow 0.0070 cm/cm
@Thickness 2.00 mm		0.0070 in/in
@Thickness 0.0787 in		Parallel; DAM; ISO 294-4
Linear Mold Shrinkage, Transverse 0.013 cm/cm
@Thickness 2.00 mm		0.013 in/in
@Thickness 0.0787 in		Normal; DAM; ISO 294-4
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 646450%RH; ISO 2039/2
 8787DAM; ISO 2039/2
Hardness, Rockwell R 11611650%RH; ISO 2039/2
 123123DAM; ISO 2039/2
Tensile Strength, Yield  67.0 MPa
@Temperature 23.0 °C		9720 psi
@Temperature 73.4 °F		50%RH; ISO 527
 96.0 MPa
@Temperature 23.0 °C		13900 psi
@Temperature 73.4 °F		DAM; ISO 527
Elongation at Break  13 %
@Temperature 23.0 °C		13 %
@Temperature 73.4 °F		DAM; nominal; ISO 527
 20 %
@Temperature 23.0 °C		20 %
@Temperature 73.4 °F		50mm/min; DAM; ISO 527
 50 %
@Temperature 23.0 °C		50 %
@Temperature 73.4 °F		50%RH; nominal; ISO 527
 >= 50 %
@Temperature 23.0 °C		>= 50 %
@Temperature 73.4 °F		50mm/min; 50%RH; ISO 527
Elongation at Yield  4.5 %
@Temperature 23.0 °C		4.5 %
@Temperature 73.4 °F		DAM; ISO 527
 18 %
@Temperature 23.0 °C		18 %
@Temperature 73.4 °F		50%RH; ISO 527
Tensile Modulus  2.00 GPa
@Temperature 23.0 °C		290 ksi
@Temperature 73.4 °F		50%RH; ISO 527
 3.60 GPa
@Temperature 23.0 °C		522 ksi
@Temperature 73.4 °F		DAM; ISO 527
Shear Modulus  0.0820 GPa
@Temperature 240 °C		11.9 ksi
@Temperature 464 °F		DAM; ISO 6721
 0.118 GPa
@Temperature 230 °C		17.1 ksi
@Temperature 446 °F		DAM; ISO 6721
 0.132 GPa
@Temperature 220 °C		19.1 ksi
@Temperature 428 °F		DAM; ISO 6721
 0.141 GPa
@Temperature 210 °C		20.5 ksi
@Temperature 410 °F		DAM; ISO 6721
 0.148 GPa
@Temperature 200 °C		21.5 ksi
@Temperature 392 °F		DAM; ISO 6721
 0.154 GPa
@Temperature 190 °C		22.3 ksi
@Temperature 374 °F		DAM; ISO 6721
 0.161 GPa
@Temperature 180 °C		23.4 ksi
@Temperature 356 °F		DAM; ISO 6721
 0.168 GPa
@Temperature 170 °C		24.4 ksi
@Temperature 338 °F		DAM; ISO 6721
 0.175 GPa
@Temperature 160 °C		25.4 ksi
@Temperature 320 °F		DAM; ISO 6721
 0.183 GPa
@Temperature 150 °C		26.5 ksi
@Temperature 302 °F		DAM; ISO 6721
 0.191 GPa
@Temperature 140 °C		27.7 ksi
@Temperature 284 °F		DAM; ISO 6721
 0.202 GPa
@Temperature 130 °C		29.3 ksi
@Temperature 266 °F		DAM; ISO 6721
 0.214 GPa
@Temperature 120 °C		31.0 ksi
@Temperature 248 °F		DAM; ISO 6721
 0.229 GPa
@Temperature 110 °C		33.2 ksi
@Temperature 230 °F		DAM; ISO 6721
 0.251 GPa
@Temperature 100 °C		36.4 ksi
@Temperature 212 °F		DAM; ISO 6721
 0.289 GPa
@Temperature 90.0 °C		41.9 ksi
@Temperature 194 °F		DAM; ISO 6721
 0.352 GPa
@Temperature 80.0 °C		51.1 ksi
@Temperature 176 °F		DAM; ISO 6721
 0.449 GPa
@Temperature 70.0 °C		65.1 ksi
@Temperature 158 °F		DAM; ISO 6721
 0.608 GPa
@Temperature 60.0 °C		88.2 ksi
@Temperature 140 °F		DAM; ISO 6721
 0.832 GPa
@Temperature 50.0 °C		121 ksi
@Temperature 122 °F		DAM; ISO 6721
 0.940 GPa
@Temperature 40.0 °C		136 ksi
@Temperature 104 °F		DAM; ISO 6721
 1.013 GPa
@Temperature 30.0 °C		146.9 ksi
@Temperature 86.0 °F		DAM; ISO 6721
 1.069 GPa
@Temperature 20.0 °C		155.0 ksi
@Temperature 68.0 °F		DAM; ISO 6721
 1.114 GPa
@Temperature 10.0 °C		161.6 ksi
@Temperature 50.0 °F		DAM; ISO 6721
 1.141 GPa
@Temperature 0.000 °C		165.5 ksi
@Temperature 32.0 °F		DAM; ISO 6721
 1.157 GPa
@Temperature -10.0 °C		167.8 ksi
@Temperature 14.0 °F		DAM; ISO 6721
 1.171 GPa
@Temperature -20.0 °C		169.8 ksi
@Temperature -4.00 °F		DAM; ISO 6721
 1.188 GPa
@Temperature -30.0 °C		172.3 ksi
@Temperature -22.0 °F		DAM; ISO 6721
 1.215 GPa
@Temperature -40.0 °C		176.2 ksi
@Temperature -40.0 °F		DAM; ISO 6721
 1.259 GPa
@Temperature -50.0 °C		182.6 ksi
@Temperature -58.0 °F		DAM; ISO 6721
Izod Impact, Notched (ISO)  2.00 kJ/m²
@Temperature -30.0 °C		0.952 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 180/1A
 3.00 kJ/m²
@Temperature -30.0 °C		1.43 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 180/1A
 3.50 kJ/m²
@Temperature 23.0 °C		1.67 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 180/1A
 9.00 kJ/m²
@Temperature 23.0 °C		4.28 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 180/1A
Charpy Impact Unnotched  NB
@Temperature -30.0 °C		NB
@Temperature -22.0 °F		50%RH; ISO 179/1eU
 NB
@Temperature -30.0 °C		NB
@Temperature -22.0 °F		DAM; ISO 179/1eU
 NB
@Temperature 23.0 °C		NB
@Temperature 73.4 °F		DAM; ISO 179/1eU
 NB
@Temperature 23.0 °C		NB
@Temperature 73.4 °F		50%RH; ISO 179/1eU
Charpy Impact, Notched  0.250 J/cm²
@Temperature -30.0 °C		1.19 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 179/1eA
 0.300 J/cm²
@Temperature -30.0 °C		1.43 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 179/1eA
 0.400 J/cm²
@Temperature 23.0 °C		1.90 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 179/1eA
 0.900 J/cm²
@Temperature 23.0 °C		4.28 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 179/1eA
Tensile Creep Modulus, 1 hour 2000 MPa
@Temperature 23.0 °C		290000 psi
@Temperature 73.4 °F		50%RH; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 23.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 73.4 °F		50%RH; 1h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 23.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 73.4 °F		50%RH; 10h; Isochronous; ISO 899
 3.00 MPa
@Strain 0.165 %,
Temperature 23.0 °C		435 psi
@Strain 0.165 %,
Temperature 73.4 °F		50%RH; 10h; Isochronous; ISO 899
 3.00 MPa
@Strain 0.146 %,
Temperature 23.0 °C		435 psi
@Strain 0.146 %,
Temperature 73.4 °F		50%RH; 1h; Isochronous; ISO 899
 6.00 MPa
@Strain 0.299 %,
Temperature 23.0 °C		870 psi
@Strain 0.299 %,
Temperature 73.4 °F		50%RH; 1h; Isochronous; ISO 899
 6.00 MPa
@Strain 0.337 %,
Temperature 23.0 °C		870 psi
@Strain 0.337 %,
Temperature 73.4 °F		50%RH; 10h; Isochronous; ISO 899
 9.00 MPa
@Strain 0.514 %,
Temperature 23.0 °C		1310 psi
@Strain 0.514 %,
Temperature 73.4 °F		50%RH; 10h; Isochronous; ISO 899
 9.00 MPa
@Strain 0.458 %,
Temperature 23.0 °C		1310 psi
@Strain 0.458 %,
Temperature 73.4 °F		50%RH; 1h; Isochronous; ISO 899
 12.0 MPa
@Strain 0.656 %,
Temperature 23.0 °C		1740 psi
@Strain 0.656 %,
Temperature 73.4 °F		50%RH; 1h; Isochronous; ISO 899
 12.0 MPa
@Strain 0.772 %,
Temperature 23.0 °C		1740 psi
@Strain 0.772 %,
Temperature 73.4 °F		50%RH; 10h; Isochronous; ISO 899
 15.0 MPa
@Strain 1.12 %,
Temperature 23.0 °C		2180 psi
@Strain 1.12 %,
Temperature 73.4 °F		50%RH; 10h; Break; Isochronous; ISO 899
 15.0 MPa
@Strain 0.926 %,
Temperature 23.0 °C		2180 psi
@Strain 0.926 %,
Temperature 73.4 °F		50%RH; 1h; Break; Isochronous; ISO 899
Tensile Creep Modulus, 1000 hours 1280 MPa
@Temperature 23.0 °C		186000 psi
@Temperature 73.4 °F		50%RH; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 23.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 73.4 °F		50%RH; 10000h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 23.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 73.4 °F		50%RH; 100h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 23.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 73.4 °F		50%RH; 1000h; Isochronous; ISO 899
 3.00 MPa
@Strain 0.231 %,
Temperature 23.0 °C		435 psi
@Strain 0.231 %,
Temperature 73.4 °F		50%RH; 1000h; Isochronous; ISO 899
 3.00 MPa
@Strain 0.192 %,
Temperature 23.0 °C		435 psi
@Strain 0.192 %,
Temperature 73.4 °F		50%RH; 100h; Isochronous; ISO 899
 3.00 MPa
@Strain 0.297 %,
Temperature 23.0 °C		435 psi
@Strain 0.297 %,
Temperature 73.4 °F		50%RH; 10000h; Isochronous; ISO 899
 6.00 MPa
@Strain 0.600 %,
Temperature 23.0 °C		870 psi
@Strain 0.600 %,
Temperature 73.4 °F		50%RH; 10000h; Isochronous; ISO 899
 6.00 MPa
@Strain 0.390 %,
Temperature 23.0 °C		870 psi
@Strain 0.390 %,
Temperature 73.4 °F		50%RH; 100h; Isochronous; ISO 899
 6.00 MPa
@Strain 0.470 %,
Temperature 23.0 °C		870 psi
@Strain 0.470 %,
Temperature 73.4 °F		50%RH; 1000h; Isochronous; ISO 899
 9.00 MPa
@Strain 0.732 %,
Temperature 23.0 °C		1310 psi
@Strain 0.732 %,
Temperature 73.4 °F		50%RH; 1000h; Isochronous; ISO 899
 9.00 MPa
@Strain 0.600 %,
Temperature 23.0 °C		1310 psi
@Strain 0.600 %,
Temperature 73.4 °F		50%RH; 100h; Isochronous; ISO 899
 9.00 MPa
@Strain 0.919 %,
Temperature 23.0 °C		1310 psi
@Strain 0.919 %,
Temperature 73.4 °F		50%RH; 10000h; Isochronous; ISO 899
 12.0 MPa
@Strain 1.45 %,
Temperature 23.0 °C		1740 psi
@Strain 1.45 %,
Temperature 73.4 °F		50%RH; 10000h; Isochronous; ISO 899
 12.0 MPa
@Strain 0.947 %,
Temperature 23.0 °C		1740 psi
@Strain 0.947 %,
Temperature 73.4 °F		50%RH; 100h; Isochronous; ISO 899
 12.0 MPa
@Strain 1.18 %,
Temperature 23.0 °C		1740 psi
@Strain 1.18 %,
Temperature 73.4 °F		50%RH; 1000h; Isochronous; ISO 899
 15.0 MPa
@Strain 2.41 %,
Temperature 23.0 °C		2180 psi
@Strain 2.41 %,
Temperature 73.4 °F		50%RH; 10000h; Break; Isochronous; ISO 899
 15.0 MPa
@Strain 1.38 %,
Temperature 23.0 °C		2180 psi
@Strain 1.38 %,
Temperature 73.4 °F		50%RH; 100h; Break; Isochronous; ISO 899
 15.0 MPa
@Strain 1.77 %,
Temperature 23.0 °C		2180 psi
@Strain 1.77 %,
Temperature 73.4 °F		50%RH; 1000h; Break; Isochronous; ISO 899
 
Electrical PropertiesMetricEnglishComments
Dielectric Constant  3.8
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		3.8
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		DAM; IEC 60250
 3.9
@Frequency 100 Hz,
Temperature 23.0 °C		3.9
@Frequency 100 Hz,
Temperature 73.4 °F		DAM; IEC 60250
 3.9
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		3.9
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		50%RH; IEC 60250
 8.7
@Frequency 100 Hz,
Temperature 23.0 °C		8.7
@Frequency 100 Hz,
Temperature 73.4 °F		50%RH; IEC 60250
Dissipation Factor  0.0070
@Frequency 100 Hz,
Temperature 23.0 °C		0.0070
@Frequency 100 Hz,
Temperature 73.4 °F		DAM; IEC 60250
 0.020
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		0.020
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		DAM; IEC 60250
 0.060
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		0.060
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		50%RH; IEC 60250
 0.24
@Frequency 100 Hz,
Temperature 23.0 °C		0.24
@Frequency 100 Hz,
Temperature 73.4 °F		50%RH; IEC 60250
Comparative Tracking Index  >= 600 V
@Temperature 23.0 °C		>= 600 V
@Temperature 73.4 °F		DAM; UL 746A
 600 V
@Temperature 23.0 °C		600 V
@Temperature 73.4 °F		DAM; IEC 60112
 >= 600 V
@Thickness 3.00 mm,
Temperature 23.0 °C		>= 600 V
@Thickness 0.118 in,
Temperature 73.4 °F		DAM; UL 746A
 >= 600 V
@Thickness 3.00 mm,
Temperature 23.0 °C		>= 600 V
@Thickness 0.118 in,
Temperature 73.4 °F		DAM; UL 746A
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow  500 µm/m-°C
@Temperature 23.0 - 55.0 °C		278 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ASTM E 831
 500 µm/m-°C
@Temperature 23.0 - 55.0 °C		278 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  121 µm/m-°C
@Temperature 23.0 - 55.0 °C		67.2 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ASTM E 831
 121 µm/m-°C
@Temperature 23.0 - 55.0 °C		67.2 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ISO 11359-1/-2
Deflection Temperature at 0.46 MPa (66 psi) 210 °C410 °FDAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 75.0 °C167 °FDAM; ISO 75-1/-2
Glass Transition Temp, Tg 60.0 °C140 °F10°C/min; DAM; ISO 11357-1/-2
UL RTI, Electrical  130 °C
@Thickness 0.710 mm		266 °F
@Thickness 0.0280 in		DAM; UL 746B
 130 °C
@Thickness 3.00 mm		266 °F
@Thickness 0.118 in		DAM; UL 746B
 130 °C
@Thickness 6.00 mm		266 °F
@Thickness 0.236 in		DAM; UL 746B
 130 °C
@Thickness 1.50 mm		266 °F
@Thickness 0.0591 in		DAM; UL 746B
UL RTI, Mechanical with Impact  75.0 °C
@Thickness 6.00 mm		167 °F
@Thickness 0.236 in		DAM; UL 746B
 75.0 °C
@Thickness 3.00 mm		167 °F
@Thickness 0.118 in		DAM; UL 746B
 75.0 °C
@Thickness 1.50 mm		167 °F
@Thickness 0.0591 in		DAM; UL 746B
 75.0 °C
@Thickness 0.710 mm		167 °F
@Thickness 0.0280 in		DAM; UL 746B
UL RTI, Mechanical without Impact  85.0 °C
@Thickness 6.00 mm		185 °F
@Thickness 0.236 in		DAM; UL 746B
 85.0 °C
@Thickness 0.710 mm		185 °F
@Thickness 0.0280 in		DAM; UL 746B
 85.0 °C
@Thickness 1.50 mm		185 °F
@Thickness 0.0591 in		DAM; UL 746B
 85.0 °C
@Thickness 3.00 mm		185 °F
@Thickness 0.118 in		DAM; UL 746B
Flammability, UL94  V-2
@Thickness 3.00 mm		V-2
@Thickness 0.118 in		DAM; IEC 60695-11-10
 V-2
@Thickness 1.50 mm		V-2
@Thickness 0.0591 in		DAM; IEC 60695-11-10
 V-2
@Thickness 6.00 mm		V-2
@Thickness 0.236 in		DAM; IEC 60695-11-10
 V-2
@Thickness 0.710 mm		V-2
@Thickness 0.0280 in		DAM; IEC 60695-11-10
 V-2
@Thickness 0.710 mm		V-2
@Thickness 0.0280 in		DAM; UL94
 V-2
@Thickness 3.00 mm		V-2
@Thickness 0.118 in		DAM; UL94
 V-2
@Thickness 1.50 mm		V-2
@Thickness 0.0591 in		DAM; UL94
 V-2
@Thickness 6.00 mm		V-2
@Thickness 0.236 in		DAM; UL94
Glow Wire Test  725 °C
@Thickness 0.710 mm		1340 °F
@Thickness 0.0280 in		DAM; Ignition; IEC 60695-2-13
 750 °C
@Thickness 1.50 mm		1380 °F
@Thickness 0.0591 in		DAM; Ignition; IEC 60695-2-13
 800 °C
@Thickness 3.00 mm		1470 °F
@Thickness 0.118 in		DAM; Ignition; IEC 60695-2-13
 960 °C
@Thickness 1.50 mm		1760 °F
@Thickness 0.0591 in		DAM; IEC 60695-2-12
 960 °C
@Thickness 3.00 mm		1760 °F
@Thickness 0.118 in		DAM; IEC 60695-2-12
 960 °C
@Thickness 0.710 mm		1760 °F
@Thickness 0.0280 in		DAM; IEC 60695-2-12
 
Processing PropertiesMetricEnglishComments
Melt Temperature 263 °C505 °F10°C/min; DAM; ISO 11357-1/-3
 290 °C554 °FDAM; Optimum
 280 - 300 °C536 - 572 °FDAM
Mold Temperature 70.0 °C158 °FDAM; optimum
 50.0 - 90.0 °C122 - 194 °FDAM
Drying Temperature 80.0 °C176 °FDAM
Dry Time 2.00 - 4.00 hour2.00 - 4.00 hourDAM
Moisture Content <= 0.20 %<= 0.20 %DAM
 
Descriptive Properties
AppearanceNatural ColorDAM
Drying RecommendedYes, if moisture content of resin exceeds recommended levelDAM
FormsPelletsDAM
GenericNylon 66DAM
Material StatusCurrentDAM
Part Marking Code>PA66<ISO 11469; DAM
Polymer FamilyPolyamideDAM
Polymer TypePA66DAM
Processing MethodInjection MoldingDAM
Product CategoryUnreinforced ResinsDAM
Resin IdentificationPA66ISO 1043; DAM
RoHS ComplianceContact ManufacturerDAM
Ultrasonic WeldableYesDAM

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45455.html

免责声明: 本文 DuPont Performance Polymers Zytel® 135F NC010 Nylon 66 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4