塑胶原料之家
  1. 首页
  2. 英文物性
  3. PA66
  4. DuPont Performance Polymers Zytel® 70G30HSLR NC010 Nylon 66

DuPont Performance Polymers Zytel® 70G30HSLR NC010 Nylon 66

DuPont Performance Polymers Zytel® 70G30HSLR NC010 Nylon 66 物性表: DuPont Performance Polymers Zytel® 70G30HSLR NC010 Nylon 66物性表及特性介绍,DuPont Performance Polymers Zytel® 70G30HSLR NC010 Nylon 66注塑参数详情,如需DuPont Performance Polymers Zytel® 70G30HSLR NC010 Nylon 66下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.37
  • 吸水率 [%]: 1.9
  • 缺口冲击强度: 10.0
  • 热变形温度 [℃]: 261.0
 
Physical PropertiesMetricEnglishComments
Density 1.37 g/cc0.0495 lb/in³DAM; ISO 1183
Filler Content 30 %30 %DAM
Water Absorption  1.9 %
@Temperature 23.0 °C		1.9 %
@Temperature 73.4 °F		Equilibrium 50%RH; DAM; ISO 62, Similar to
 6.0 %
@Temperature 23.0 °C		6.0 %
@Temperature 73.4 °F		Saturation, immersed; DAM; ISO 62, Similar to
Viscosity  58000 cP
@Shear Rate 7000 1/s,
Temperature 305 °C		58000 cP
@Shear Rate 7000 1/s,
Temperature 581 °F		DAM; ISO 11443
 69000 cP
@Shear Rate 5000 1/s,
Temperature 305 °C		69000 cP
@Shear Rate 5000 1/s,
Temperature 581 °F		DAM; ISO 11443
 73000 cP
@Shear Rate 7000 1/s,
Temperature 295 °C		73000 cP
@Shear Rate 7000 1/s,
Temperature 563 °F		DAM; ISO 11443
 86000 cP
@Shear Rate 5000 1/s,
Temperature 295 °C		86000 cP
@Shear Rate 5000 1/s,
Temperature 563 °F		DAM; ISO 11443
 107000 cP
@Shear Rate 2000 1/s,
Temperature 305 °C		107000 cP
@Shear Rate 2000 1/s,
Temperature 581 °F		DAM; ISO 11443
 116000 cP
@Shear Rate 7000 1/s,
Temperature 275 °C		116000 cP
@Shear Rate 7000 1/s,
Temperature 527 °F		DAM; ISO 11443
 134000 cP
@Shear Rate 2000 1/s,
Temperature 295 °C		134000 cP
@Shear Rate 2000 1/s,
Temperature 563 °F		DAM; ISO 11443
 137000 cP
@Shear Rate 5000 1/s,
Temperature 275 °C		137000 cP
@Shear Rate 5000 1/s,
Temperature 527 °F		DAM; ISO 11443
 147000 cP
@Shear Rate 1000 1/s,
Temperature 305 °C		147000 cP
@Shear Rate 1000 1/s,
Temperature 581 °F		DAM; ISO 11443
 171000 cP
@Shear Rate 700 1/s,
Temperature 305 °C		171000 cP
@Shear Rate 700 1/s,
Temperature 581 °F		DAM; ISO 11443
 185000 cP
@Shear Rate 1000 1/s,
Temperature 295 °C		185000 cP
@Shear Rate 1000 1/s,
Temperature 563 °F		DAM; ISO 11443
 196000 cP
@Shear Rate 500 1/s,
Temperature 305 °C		196000 cP
@Shear Rate 500 1/s,
Temperature 581 °F		DAM; ISO 11443
 215000 cP
@Shear Rate 700 1/s,
Temperature 295 °C		215000 cP
@Shear Rate 700 1/s,
Temperature 563 °F		DAM; ISO 11443
 216000 cP
@Shear Rate 2000 1/s,
Temperature 275 °C		216000 cP
@Shear Rate 2000 1/s,
Temperature 527 °F		DAM; ISO 11443
 248000 cP
@Shear Rate 500 1/s,
Temperature 295 °C		248000 cP
@Shear Rate 500 1/s,
Temperature 563 °F		DAM; ISO 11443
 299000 cP
@Shear Rate 1000 1/s,
Temperature 275 °C		299000 cP
@Shear Rate 1000 1/s,
Temperature 527 °F		DAM; ISO 11443
 350000 cP
@Shear Rate 700 1/s,
Temperature 275 °C		350000 cP
@Shear Rate 700 1/s,
Temperature 527 °F		DAM; ISO 11443
 404000 cP
@Shear Rate 500 1/s,
Temperature 275 °C		404000 cP
@Shear Rate 500 1/s,
Temperature 527 °F		DAM; ISO 11443
Linear Mold Shrinkage, Flow 0.0030 cm/cm
@Thickness 2.00 mm		0.0030 in/in
@Thickness 0.0787 in		Parallel; DAM; ISO 294-4
Linear Mold Shrinkage, Transverse 0.011 cm/cm
@Thickness 2.00 mm		0.011 in/in
@Thickness 0.0787 in		Normal; DAM; ISO 294-4
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break  130 MPa
@Temperature 23.0 °C		18900 psi
@Temperature 73.4 °F		50%RH; ISO 527
 195 MPa
@Temperature 23.0 °C		28300 psi
@Temperature 73.4 °F		DAM; ISO 527
Elongation at Break  3.3 %
@Temperature 23.0 °C		3.3 %
@Temperature 73.4 °F		DAM; ISO 527
 5.0 %
@Temperature 23.0 °C		5.0 %
@Temperature 73.4 °F		50%RH; ISO 527
Tensile Modulus  7.20 GPa
@Temperature 23.0 °C		1040 ksi
@Temperature 73.4 °F		50%RH; ISO 527
 10.0 GPa
@Temperature 23.0 °C		1450 ksi
@Temperature 73.4 °F		DAM; ISO 527
Izod Impact, Notched (ISO)  10.0 kJ/m²
@Temperature -30.0 °C		4.76 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 180/1A
 12.0 kJ/m²
@Temperature -30.0 °C		5.71 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 180/1A
 12.0 kJ/m²
@Temperature 23.0 °C		5.71 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 180/1A
 14.0 kJ/m²
@Temperature 23.0 °C		6.66 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 180/1A
Charpy Impact Unnotched  7.00 J/cm²
@Temperature -30.0 °C		33.3 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 179/1eU
 7.20 J/cm²
@Temperature -30.0 °C		34.3 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 179/1eU
 8.20 J/cm²
@Temperature 23.0 °C		39.0 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 179/1eU
 9.20 J/cm²
@Temperature 23.0 °C		43.8 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 179/1eU
Charpy Impact, Notched  1.00 J/cm²
@Temperature -30.0 °C		4.76 ft-lb/in²
@Temperature -22.0 °F		DAM; ISO 179/1eA
 1.00 J/cm²
@Temperature -30.0 °C		4.76 ft-lb/in²
@Temperature -22.0 °F		50%RH; ISO 179/1eA
 1.30 J/cm²
@Temperature 23.0 °C		6.19 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 179/1eA
 1.50 J/cm²
@Temperature 23.0 °C		7.14 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 179/1eA
Tensile Creep Modulus, 1 hour 6800 MPa
@Temperature 23.0 °C		986000 psi
@Temperature 73.4 °F		50%RH; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 23.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 73.4 °F		50%RH; 1h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 100 °C		0.000 psi
@Strain 0.000 %,
Temperature 212 °F		50%RH; 10h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 80.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 176 °F		50%RH; 10h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 23.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 73.4 °F		50%RH; 10h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 80.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 176 °F		50%RH; 1h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 100 °C		0.000 psi
@Strain 0.000 %,
Temperature 212 °F		50%RH; 1h; Isochronous; ISO 899
 10.0 MPa
@Strain 0.167 %,
Temperature 100 °C		1450 psi
@Strain 0.167 %,
Temperature 212 °F		50%RH; 1h; Isochronous; ISO 899
 10.0 MPa
@Strain 0.159 %,
Temperature 80.0 °C		1450 psi
@Strain 0.159 %,
Temperature 176 °F		50%RH; 1h; Isochronous; ISO 899
 10.0 MPa
@Strain 0.169 %,
Temperature 80.0 °C		1450 psi
@Strain 0.169 %,
Temperature 176 °F		50%RH; 10h; Isochronous; ISO 899
 10.0 MPa
@Strain 0.172 %,
Temperature 100 °C		1450 psi
@Strain 0.172 %,
Temperature 212 °F		50%RH; 10h; Isochronous; ISO 899
 15.0 MPa
@Strain 0.259 %,
Temperature 80.0 °C		2180 psi
@Strain 0.259 %,
Temperature 176 °F		50%RH; 10h; Isochronous; ISO 899
 15.0 MPa
@Strain 0.205 %,
Temperature 23.0 °C		2180 psi
@Strain 0.205 %,
Temperature 73.4 °F		50%RH; 10h; Isochronous; ISO 899
 15.0 MPa
@Strain 0.244 %,
Temperature 80.0 °C		2180 psi
@Strain 0.244 %,
Temperature 176 °F		50%RH; 1h; Isochronous; ISO 899
 15.0 MPa
@Strain 0.190 %,
Temperature 23.0 °C		2180 psi
@Strain 0.190 %,
Temperature 73.4 °F		50%RH; 1h; Isochronous; ISO 899
 20.0 MPa
@Strain 0.333 %,
Temperature 80.0 °C		2900 psi
@Strain 0.333 %,
Temperature 176 °F		50%RH; 1h; Isochronous; ISO 899
 20.0 MPa
@Strain 0.371 %,
Temperature 100 °C		2900 psi
@Strain 0.371 %,
Temperature 212 °F		50%RH; 1h; Isochronous; ISO 899
 20.0 MPa
@Strain 0.352 %,
Temperature 80.0 °C		2900 psi
@Strain 0.352 %,
Temperature 176 °F		50%RH; 10h; Isochronous; ISO 899
 20.0 MPa
@Strain 0.396 %,
Temperature 100 °C		2900 psi
@Strain 0.396 %,
Temperature 212 °F		50%RH; 10h; Isochronous; ISO 899
 25.0 MPa
@Strain 0.345 %,
Temperature 23.0 °C		3630 psi
@Strain 0.345 %,
Temperature 73.4 °F		50%RH; 10h; Isochronous; ISO 899
 25.0 MPa
@Strain 0.322 %,
Temperature 23.0 °C		3630 psi
@Strain 0.322 %,
Temperature 73.4 °F		50%RH; 1h; Isochronous; ISO 899
 30.0 MPa
@Strain 0.391 %,
Temperature 23.0 °C		4350 psi
@Strain 0.391 %,
Temperature 73.4 °F		50%RH; 1h; Isochronous; ISO 899
 30.0 MPa
@Strain 0.418 %,
Temperature 23.0 °C		4350 psi
@Strain 0.418 %,
Temperature 73.4 °F		50%RH; 10h; Isochronous; ISO 899
 30.0 MPa
@Strain 0.564 %,
Temperature 80.0 °C		4350 psi
@Strain 0.564 %,
Temperature 176 °F		50%RH; 10h; Isochronous; ISO 899
 30.0 MPa
@Strain 0.622 %,
Temperature 100 °C		4350 psi
@Strain 0.622 %,
Temperature 212 °F		50%RH; 10h; Isochronous; ISO 899
 30.0 MPa
@Strain 0.594 %,
Temperature 100 °C		4350 psi
@Strain 0.594 %,
Temperature 212 °F		50%RH; 1h; Isochronous; ISO 899
 30.0 MPa
@Strain 0.529 %,
Temperature 80.0 °C		4350 psi
@Strain 0.529 %,
Temperature 176 °F		50%RH; 1h; Isochronous; ISO 899
 40.0 MPa
@Strain 0.842 %,
Temperature 100 °C		5800 psi
@Strain 0.842 %,
Temperature 212 °F		50%RH; 1h; Break; Isochronous; ISO 899
 40.0 MPa
@Strain 0.884 %,
Temperature 100 °C		5800 psi
@Strain 0.884 %,
Temperature 212 °F		50%RH; 10h; Break; Isochronous; ISO 899
 40.0 MPa
@Strain 0.815 %,
Temperature 80.0 °C		5800 psi
@Strain 0.815 %,
Temperature 176 °F		50%RH; 10h; Break; Isochronous; ISO 899
 40.0 MPa
@Strain 0.759 %,
Temperature 80.0 °C		5800 psi
@Strain 0.759 %,
Temperature 176 °F		50%RH; 1h; Break; Isochronous; ISO 899
 45.0 MPa
@Strain 0.664 %,
Temperature 23.0 °C		6530 psi
@Strain 0.664 %,
Temperature 73.4 °F		50%RH; 10h; Isochronous; ISO 899
 45.0 MPa
@Strain 0.621 %,
Temperature 23.0 °C		6530 psi
@Strain 0.621 %,
Temperature 73.4 °F		50%RH; 1h; Isochronous; ISO 899
 60.0 MPa
@Strain 1.01 %,
Temperature 23.0 °C		8700 psi
@Strain 1.01 %,
Temperature 73.4 °F		50%RH; 10h; Break; Isochronous; ISO 899
 60.0 MPa
@Strain 0.928 %,
Temperature 23.0 °C		8700 psi
@Strain 0.928 %,
Temperature 73.4 °F		50%RH; 1h; Break; Isochronous; ISO 899
Tensile Creep Modulus, 1000 hours 5100 MPa
@Temperature 23.0 °C		740000 psi
@Temperature 73.4 °F		50%RH; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 23.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 73.4 °F		50%RH; 10000h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 100 °C		0.000 psi
@Strain 0.000 %,
Temperature 212 °F		50%RH; 100h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 23.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 73.4 °F		50%RH; 1000h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 80.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 176 °F		50%RH; 10000h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 80.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 176 °F		50%RH; 100h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 23.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 73.4 °F		50%RH; 100h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 100 °C		0.000 psi
@Strain 0.000 %,
Temperature 212 °F		50%RH; 1000h; Isochronous; ISO 899
 0.000 MPa
@Strain 0.000 %,
Temperature 80.0 °C		0.000 psi
@Strain 0.000 %,
Temperature 176 °F		50%RH; 1000h; Isochronous; ISO 899
 10.0 MPa
@Strain 0.184 %,
Temperature 80.0 °C		1450 psi
@Strain 0.184 %,
Temperature 176 °F		50%RH; 1000h; Isochronous; ISO 899
 10.0 MPa
@Strain 0.185 %,
Temperature 100 °C		1450 psi
@Strain 0.185 %,
Temperature 212 °F		50%RH; 1000h; Isochronous; ISO 899
 10.0 MPa
@Strain 0.177 %,
Temperature 80.0 °C		1450 psi
@Strain 0.177 %,
Temperature 176 °F		50%RH; 100h; Isochronous; ISO 899
 10.0 MPa
@Strain 0.191 %,
Temperature 80.0 °C		1450 psi
@Strain 0.191 %,
Temperature 176 °F		50%RH; 10000h; Isochronous; ISO 899
 10.0 MPa
@Strain 0.177 %,
Temperature 100 °C		1450 psi
@Strain 0.177 %,
Temperature 212 °F		50%RH; 100h; Isochronous; ISO 899
 15.0 MPa
@Strain 0.240 %,
Temperature 23.0 °C		2180 psi
@Strain 0.240 %,
Temperature 73.4 °F		50%RH; 10000h; Isochronous; ISO 899
 15.0 MPa
@Strain 0.293 %,
Temperature 80.0 °C		2180 psi
@Strain 0.293 %,
Temperature 176 °F		50%RH; 10000h; Isochronous; ISO 899
 15.0 MPa
@Strain 0.230 %,
Temperature 23.0 °C		2180 psi
@Strain 0.230 %,
Temperature 73.4 °F		50%RH; 1000h; Isochronous; ISO 899
 15.0 MPa
@Strain 0.272 %,
Temperature 80.0 °C		2180 psi
@Strain 0.272 %,
Temperature 176 °F		50%RH; 100h; Isochronous; ISO 899
 15.0 MPa
@Strain 0.218 %,
Temperature 23.0 °C		2180 psi
@Strain 0.218 %,
Temperature 73.4 °F		50%RH; 100h; Isochronous; ISO 899
 15.0 MPa
@Strain 0.284 %,
Temperature 80.0 °C		2180 psi
@Strain 0.284 %,
Temperature 176 °F		50%RH; 1000h; Isochronous; ISO 899
 20.0 MPa
@Strain 0.391 %,
Temperature 80.0 °C		2900 psi
@Strain 0.391 %,
Temperature 176 °F		50%RH; 1000h; Isochronous; ISO 899
 20.0 MPa
@Strain 0.421 %,
Temperature 100 °C		2900 psi
@Strain 0.421 %,
Temperature 212 °F		50%RH; 1000h; Isochronous; ISO 899
 20.0 MPa
@Strain 0.373 %,
Temperature 80.0 °C		2900 psi
@Strain 0.373 %,
Temperature 176 °F		50%RH; 100h; Isochronous; ISO 899
 20.0 MPa
@Strain 0.399 %,
Temperature 80.0 °C		2900 psi
@Strain 0.399 %,
Temperature 176 °F		50%RH; 10000h; Isochronous; ISO 899
 20.0 MPa
@Strain 0.408 %,
Temperature 100 °C		2900 psi
@Strain 0.408 %,
Temperature 212 °F		50%RH; 100h; Isochronous; ISO 899
 25.0 MPa
@Strain 0.406 %,
Temperature 23.0 °C		3630 psi
@Strain 0.406 %,
Temperature 73.4 °F		50%RH; 10000h; Isochronous; ISO 899
 25.0 MPa
@Strain 0.387 %,
Temperature 23.0 °C		3630 psi
@Strain 0.387 %,
Temperature 73.4 °F		50%RH; 1000h; Isochronous; ISO 899
 25.0 MPa
@Strain 0.367 %,
Temperature 23.0 °C		3630 psi
@Strain 0.367 %,
Temperature 73.4 °F		50%RH; 100h; Isochronous; ISO 899
 30.0 MPa
@Strain 0.446 %,
Temperature 23.0 °C		4350 psi
@Strain 0.446 %,
Temperature 73.4 °F		50%RH; 100h; Isochronous; ISO 899
 30.0 MPa
@Strain 0.596 %,
Temperature 80.0 °C		4350 psi
@Strain 0.596 %,
Temperature 176 °F		50%RH; 100h; Isochronous; ISO 899
 30.0 MPa
@Strain 0.666 %,
Temperature 100 °C		4350 psi
@Strain 0.666 %,
Temperature 212 °F		50%RH; 1000h; Isochronous; ISO 899
 30.0 MPa
@Strain 0.625 %,
Temperature 80.0 °C		4350 psi
@Strain 0.625 %,
Temperature 176 °F		50%RH; 1000h; Isochronous; ISO 899
 30.0 MPa
@Strain 0.471 %,
Temperature 23.0 °C		4350 psi
@Strain 0.471 %,
Temperature 73.4 °F		50%RH; 1000h; Isochronous; ISO 899
 30.0 MPa
@Strain 0.636 %,
Temperature 80.0 °C		4350 psi
@Strain 0.636 %,
Temperature 176 °F		50%RH; 10000h; Isochronous; ISO 899
 30.0 MPa
@Strain 0.494 %,
Temperature 23.0 °C		4350 psi
@Strain 0.494 %,
Temperature 73.4 °F		50%RH; 10000h; Isochronous; ISO 899
 30.0 MPa
@Strain 0.647 %,
Temperature 100 °C		4350 psi
@Strain 0.647 %,
Temperature 212 °F		50%RH; 100h; Isochronous; ISO 899
 40.0 MPa
@Strain 0.937 %,
Temperature 100 °C		5800 psi
@Strain 0.937 %,
Temperature 212 °F		50%RH; 100h; Break; Isochronous; ISO 899
 40.0 MPa
@Strain 0.889 %,
Temperature 80.0 °C		5800 psi
@Strain 0.889 %,
Temperature 176 °F		50%RH; 1000h; Break; Isochronous; ISO 899
 40.0 MPa
@Strain 0.901 %,
Temperature 80.0 °C		5800 psi
@Strain 0.901 %,
Temperature 176 °F		50%RH; 10000h; Break; Isochronous; ISO 899
 40.0 MPa
@Strain 0.968 %,
Temperature 100 °C		5800 psi
@Strain 0.968 %,
Temperature 212 °F		50%RH; 1000h; Break; Isochronous; ISO 899
 40.0 MPa
@Strain 0.860 %,
Temperature 80.0 °C		5800 psi
@Strain 0.860 %,
Temperature 176 °F		50%RH; 100h; Break; Isochronous; ISO 899
 45.0 MPa
@Strain 0.711 %,
Temperature 23.0 °C		6530 psi
@Strain 0.711 %,
Temperature 73.4 °F		50%RH; 100h; Isochronous; ISO 899
 45.0 MPa
@Strain 0.755 %,
Temperature 23.0 °C		6530 psi
@Strain 0.755 %,
Temperature 73.4 °F		50%RH; 1000h; Isochronous; ISO 899
 45.0 MPa
@Strain 0.793 %,
Temperature 23.0 °C		6530 psi
@Strain 0.793 %,
Temperature 73.4 °F		50%RH; 10000h; Isochronous; ISO 899
 60.0 MPa
@Strain 1.20 %,
Temperature 23.0 °C		8700 psi
@Strain 1.20 %,
Temperature 73.4 °F		50%RH; 10000h; Break; Isochronous; ISO 899
 60.0 MPa
@Strain 1.09 %,
Temperature 23.0 °C		8700 psi
@Strain 1.09 %,
Temperature 73.4 °F		50%RH; 100h; Break; Isochronous; ISO 899
 60.0 MPa
@Strain 1.15 %,
Temperature 23.0 °C		8700 psi
@Strain 1.15 %,
Temperature 73.4 °F		50%RH; 1000h; Break; Isochronous; ISO 899
 
Electrical PropertiesMetricEnglishComments
Volume Resistivity  1.00e+11 ohm-cm
@Temperature 23.0 °C		1.00e+11 ohm-cm
@Temperature 73.4 °F		50%RH; IEC 60093
 >= 1.00e+15 ohm-cm
@Temperature 23.0 °C		>= 1.00e+15 ohm-cm
@Temperature 73.4 °F		DAM; IEC 60093
 >= 1.00e+17 ohm-cm
@Temperature 23.0 °C		>= 1.00e+17 ohm-cm
@Temperature 73.4 °F		DAM; IEC 60093
Surface Resistance  1.00e+13 ohm
@Temperature 23.0 °C		1.00e+13 ohm
@Temperature 73.4 °F		50%RH; IEC 60093
 >= 1.00e+15 ohm
@Temperature 23.0 °C		>= 1.00e+15 ohm
@Temperature 73.4 °F		DAM; IEC 60093
Dielectric Constant  4.1
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		4.1
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		DAM; IEC 60250
 4.3
@Frequency 100 Hz,
Temperature 23.0 °C		4.3
@Frequency 100 Hz,
Temperature 73.4 °F		DAM; IEC 60250
 4.6
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		4.6
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		50%RH; IEC 60250
 10.8
@Frequency 100 Hz,
Temperature 23.0 °C		10.8
@Frequency 100 Hz,
Temperature 73.4 °F		50%RH; IEC 60250
Dielectric Strength  32.0 kV/mm
@Thickness 1.00 mm,
Temperature 23.0 °C		813 kV/in
@Thickness 0.0394 in,
Temperature 73.4 °F		50%RH; IEC 60243-1
 38.0 kV/mm
@Thickness 1.00 mm,
Temperature 23.0 °C		965 kV/in
@Thickness 0.0394 in,
Temperature 73.4 °F		DAM; IEC 60243-1
Dissipation Factor  0.0070
@Frequency 100 Hz,
Temperature 23.0 °C		0.0070
@Frequency 100 Hz,
Temperature 73.4 °F		DAM; IEC 60250
 0.015
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		0.015
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		DAM; IEC 60250
 0.065
@Frequency 1.00e+6 Hz,
Temperature 23.0 °C		0.065
@Frequency 1.00e+6 Hz,
Temperature 73.4 °F		50%RH; IEC 60250
 0.46
@Frequency 100 Hz,
Temperature 23.0 °C		0.46
@Frequency 100 Hz,
Temperature 73.4 °F		50%RH; IEC 60250
Comparative Tracking Index 450 V
@Temperature 23.0 °C		450 V
@Temperature 73.4 °F		DAM; IEC 60112
 400 V
@Thickness 3.00 mm,
Temperature 23.0 °C		400 V
@Thickness 0.118 in,
Temperature 73.4 °F		DAM; UL 746A
 400 - 600 V
@Thickness 3.00 mm,
Temperature 23.0 °C		400 - 600 V
@Thickness 0.118 in,
Temperature 73.4 °F		DAM; UL 746A
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow  500 µm/m-°C
@Temperature 23.0 - 55.0 °C		278 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ASTM E 831
 500 µm/m-°C
@Temperature 23.0 - 55.0 °C		278 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  107 µm/m-°C
@Temperature 23.0 - 55.0 °C		59.4 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ASTM E 831
 107 µm/m-°C
@Temperature 23.0 - 55.0 °C		59.4 µin/in-°F
@Temperature 73.4 - 131 °F		DAM; ISO 11359-1/-2
Deflection Temperature at 0.46 MPa (66 psi) 261 °C502 °FDAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 253 °C487 °FDAM; ISO 75-1/-2
Glass Transition Temp, Tg 80.0 °C176 °F10°C/min; DAM; ISO 11357-1/-2
UL RTI, Electrical  140 °C
@Thickness 3.00 mm		284 °F
@Thickness 0.118 in		DAM; UL 746B
 140 °C
@Thickness 1.50 mm		284 °F
@Thickness 0.0591 in		DAM; UL 746B
 140 °C
@Thickness 0.750 mm		284 °F
@Thickness 0.0295 in		DAM; UL 746B
UL RTI, Mechanical with Impact  125 °C
@Thickness 3.00 mm		257 °F
@Thickness 0.118 in		DAM; UL 746B
 125 °C
@Thickness 1.50 mm		257 °F
@Thickness 0.0591 in		DAM; UL 746B
 125 °C
@Thickness 0.750 mm		257 °F
@Thickness 0.0295 in		DAM; UL 746B
UL RTI, Mechanical without Impact  140 °C
@Thickness 3.00 mm		284 °F
@Thickness 0.118 in		DAM; UL 746B
 140 °C
@Thickness 1.50 mm		284 °F
@Thickness 0.0591 in		DAM; UL 746B
 140 °C
@Thickness 0.750 mm		284 °F
@Thickness 0.0295 in		DAM; UL 746B
Flammability, UL94  HB
@Thickness 3.00 mm		HB
@Thickness 0.118 in		DAM; IEC 60695-11-10
 HB
@Thickness 0.750 mm		HB
@Thickness 0.0295 in		DAM; IEC 60695-11-10
 HB
@Thickness 1.50 mm		HB
@Thickness 0.0591 in		DAM; IEC 60695-11-10
 HB
@Thickness 0.750 mm		HB
@Thickness 0.0295 in		DAM; UL94
 HB
@Thickness 3.00 mm		HB
@Thickness 0.118 in		DAM; UL94
 HB
@Thickness 1.50 mm		HB
@Thickness 0.0591 in		DAM; UL94
 
Processing PropertiesMetricEnglishComments
Melt Temperature 262 °C504 °F10°C/min; DAM; ISO 11357-1/-3
 295 °C563 °FDAM; Optimum
 285 - 305 °C545 - 581 °FDAM
Mold Temperature 70.0 - 120 °C158 - 248 °FDAM
 100 °C212 °FDAM; optimum
Drying Temperature 80.0 °C176 °FDAM
Dry Time 2.00 - 4.00 hour2.00 - 4.00 hourDAM
Moisture Content <= 0.20 %<= 0.20 %DAM
 
Descriptive Properties
AdditiveHeat StabilizerDAM
 Hydrolysis ResistantDAM
AppearanceNatural ColorDAM
Drying RecommendedYes, if moisture content of resin exceeds recommended levelDAM
FeaturesAntifreeze ResistantDAM
 Chemical Resistance, GoodDAM
 Creep Resistance, GoodDAM
 Fatigue ResistantDAM
 Fuel ResistantDAM
 Grease ResistantDAM
 Heat Aging Resistance, GoodDAM
 Hydrolysis ResistantDAM
 Oil ResistantDAM
 Stiffness, HighDAM
 Strength, HighDAM
 Thermal Aging Resistance, GoodDAM
FillerGlass fiber reinforcementDAM
FormsPelletsDAM
GenericNylon 66DAM
Heat StabilizedYesDAM
Material StatusCurrentDAM
Part Marking Code>PA66-GF30<ISO 11469; DAM
Polymer FamilyPolyamideDAM
Polymer TypePA66DAM
Processing MethodInjection MoldingDAM
Product CategoryGlass Reinforced ResinsDAM
 Hydrolysis Resistant ResinsDAM
Region Available - GlobalYesDAM
Resin IdentificationPA66-GF30ISO 1043; DAM
RoHS ComplianceContact ManufacturerDAM
Ultrasonic WeldableYesDAM
UsesAppliance ComponentsDAM
 Automotive ApplicationsDAM
 Electrical/Electronic ApplicationsDAM
 Industrial ApplicationsDAM

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45462.html

免责声明: 本文 DuPont Performance Polymers Zytel® 70G30HSLR NC010 Nylon 66 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4