Ensinger Tecapeek® XP-103 Compression Molded PEEK Compound, 15% Carbon Fiber

Ensinger Tecapeek® XP-103 Compression Molded PEEK Compound, 15% Carbon Fiber 物性表: Ensinger Tecapeek® XP-103 Compression Molded PEEK Compound, 15% Carbon Fiber物性表及特性介绍,Ensinger Tecapeek® XP-103 Compression Molded PEEK Compound, 15% Carbon Fiber注塑参数详情,如需Ensinger Tecapeek® XP-103 Compression Molded PEEK Compound, 15% Carbon Fiber下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.38
  • 吸水率 [%]: 0.06
  • 缺口冲击强度: 0.342
  • 弯曲模量 [MPa]: 8.96
 
Physical PropertiesMetricEnglishComments
Density 1.38 g/cc0.0499 lb/in³ASTM D792
Filler Content 15 %15 %
Water Absorption 0.060 %
@Time 86400 sec
0.060 %
@Time 24.0 hour
ASTM D570
 
Mechanical PropertiesMetricEnglishComments
Hardness, Rockwell M 104104ASTM D785
Hardness, Shore D 8888ASTM D2240
Tensile Strength 106 MPa15400 psiASTM D638
Elongation at Break 2.8 %2.8 %ASTM D638
 3.3 %3.3 %Flexural Strain; ASTM D790
Tensile Modulus 7.58 GPa1100 ksiASTM D638
Flexural Strength 203 MPa29500 psiASTM D790
Flexural Modulus 8.96 GPa1300 ksiASTM D790
Compressive Strength 167 MPa24200 psiASTM D695
Compressive Modulus 3.45 GPa500 ksiASTM D695
Izod Impact, Notched 0.342 J/cm0.640 ft-lb/inASTM D256
 
Electrical PropertiesMetricEnglishComments
Surface Resistance <= 10000 ohm<= 10000 ohmASTM D257
 
Thermal PropertiesMetricEnglishComments
CTE, linear 34.2 µm/m-°C19.0 µin/in-°FASTM E831
Melting Point 343 °C649 °FDSC
Heat Distortion Temperature 253 °C487 °FASTM D648
 
Descriptive Properties
ColorBlack

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-49805.html

免责声明: 本文 Ensinger Tecapeek® XP-103 Compression Molded PEEK Compound, 15% Carbon Fiber 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4