Ensinger Tecapeek® XP-113 Compression Molded PEEK Compound, 10% PTFE, 15% Graphite, and 3% Carbon Fi物性表参数

Ensinger Tecapeek® XP-113 Compression Molded PEEK Compound, 10% PTFE, 15% Graphite, and 3% Carbon Fi

Ensinger Tecapeek® XP-113 Compression Molded PEEK Compound, 10% PTFE, 15% Graphite, and 3% Carbon Fi 物性表: Ensinger Tecapeek® XP-113 Compression Molded PEEK Compound, 10% PTFE, 15% Graphite, and 3% Carbon Fi物性表及特性介绍,Ensinger Tecapeek® XP-113 Compression Molded PEEK Compound, 10% PTFE, 15% Graphite, and 3% Carbon Fi注塑参数详情,如需Ensinger Tecapeek® XP-113 Compression Molded PEEK Compound, 10% PTFE, 15% Graphite, and 3% Carbon Fi下载, 可到相关下载区下载

密度 [g/cm3]: 1.47
弯曲模量 [MPa]: 4.83

Physical Properties	Metric	English	Comments

Density	1.47 g/cc	0.0531 lb/in³	ASTM D792
Filler Content	25 %	25 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	96	96	ASTM D785
Tensile Strength	51.7 MPa	7500 psi	ASTM D638
Elongation at Break	1.3 %	1.3 %	ASTM D638
Tensile Modulus	4.83 GPa	700 ksi	ASTM D638
Flexural Strength	82.7 MPa	12000 psi	ASTM D790
Flexural Modulus	4.83 GPa	700 ksi	ASTM D790
Compressive Strength	117 MPa	17000 psi	ASTM D695

Thermal Properties	Metric	English	Comments
Melting Point	343 °C	649 °F	DSC

Descriptive Properties
Color	Black

关键词:
PEEK
供应
15% Graphite
Ensinger Tecapeek® XP-113 Compression Molded PEEK Compound
10% PTFE
and 3% Carbon Fi

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-49806.html

免责声明: 本文 Ensinger Tecapeek® XP-113 Compression Molded PEEK Compound, 10% PTFE, 15% Graphite, and 3% Carbon Fi 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络