Ensinger Tecapeek® XP-114 Compression Molded PEEK Compound, 40% Carbon Fiber物性表参数

Ensinger Tecapeek® XP-114 Compression Molded PEEK Compound, 40% Carbon Fiber

Ensinger Tecapeek® XP-114 Compression Molded PEEK Compound, 40% Carbon Fiber 物性表: Ensinger Tecapeek® XP-114 Compression Molded PEEK Compound, 40% Carbon Fiber物性表及特性介绍,Ensinger Tecapeek® XP-114 Compression Molded PEEK Compound, 40% Carbon Fiber注塑参数详情,如需Ensinger Tecapeek® XP-114 Compression Molded PEEK Compound, 40% Carbon Fiber下载, 可到相关下载区下载

密度 [g/cm3]: 1.44
缺口冲击强度: 0.593
弯曲模量 [MPa]: 11.7

Physical Properties	Metric	English	Comments

Density	1.44 g/cc	0.0520 lb/in³	ASTM D792
Filler Content	40 %	40 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	123	123	ASTM D785
Hardness, Shore D	89	89	ASTM D2240
Tensile Strength	122 MPa	17700 psi	ASTM D638
Elongation at Break	1.5 %	1.5 %	ASTM D638
Flexural Strength	193 MPa	28000 psi	ASTM D790
Flexural Modulus	11.7 GPa	1700 ksi	ASTM D790
Izod Impact, Notched	0.593 J/cm	1.11 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Melting Point	343 °C	649 °F	DSC

Descriptive Properties
Color	Black

关键词:
PEEK
供应
Ensinger Tecapeek® XP-114 Compression Molded PEEK Compound
40% Carbon Fiber

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-49809.html

免责声明: 本文 Ensinger Tecapeek® XP-114 Compression Molded PEEK Compound, 40% Carbon Fiber 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络