Ensinger Tecapeek® XP-118 Compression Molded PEEK Compound, 20% Fiberglass with 5% PTFE物性表参数

Ensinger Tecapeek® XP-118 Compression Molded PEEK Compound, 20% Fiberglass with 5% PTFE

Ensinger Tecapeek® XP-118 Compression Molded PEEK Compound, 20% Fiberglass with 5% PTFE 物性表: Ensinger Tecapeek® XP-118 Compression Molded PEEK Compound, 20% Fiberglass with 5% PTFE物性表及特性介绍,Ensinger Tecapeek® XP-118 Compression Molded PEEK Compound, 20% Fiberglass with 5% PTFE注塑参数详情,如需Ensinger Tecapeek® XP-118 Compression Molded PEEK Compound, 20% Fiberglass with 5% PTFE下载, 可到相关下载区下载

密度 [g/cm3]: 1.52
缺口冲击强度: 0.406
弯曲模量 [MPa]: 6.21

Physical Properties	Metric	English	Comments

Density	1.52 g/cc	0.0549 lb/in³	ASTM D792
Filler Content	25 %	25 %

Mechanical Properties	Metric	English	Comments
Tensile Strength	82.7 MPa	12000 psi	ASTM D638
Elongation at Break	2.4 %	2.4 %	ASTM D638
Flexural Strength	138 MPa	20000 psi	ASTM D790
Flexural Modulus	6.21 GPa	900 ksi	ASTM D790
Izod Impact, Notched	0.406 J/cm	0.760 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Melting Point	343 °C	649 °F	DSC

Descriptive Properties
Color	Tan

关键词:
PEEK
供应
Ensinger Tecapeek® XP-118 Compression Molded PEEK Compound
20% Fiberglass with 5% PTFE

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-49816.html

免责声明: 本文 Ensinger Tecapeek® XP-118 Compression Molded PEEK Compound, 20% Fiberglass with 5% PTFE 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络