Ensinger Tecapeek® XP-119 Compression Molded PEEK Compound, 10% Carbon Fiber物性表参数

Ensinger Tecapeek® XP-119 Compression Molded PEEK Compound, 10% Carbon Fiber

Ensinger Tecapeek® XP-119 Compression Molded PEEK Compound, 10% Carbon Fiber 物性表: Ensinger Tecapeek® XP-119 Compression Molded PEEK Compound, 10% Carbon Fiber物性表及特性介绍,Ensinger Tecapeek® XP-119 Compression Molded PEEK Compound, 10% Carbon Fiber注塑参数详情,如需Ensinger Tecapeek® XP-119 Compression Molded PEEK Compound, 10% Carbon Fiber下载, 可到相关下载区下载

密度 [g/cm3]: 1.35
缺口冲击强度: 0.294
弯曲模量 [MPa]: 7.58

Physical Properties	Metric	English	Comments

Density	1.35 g/cc	0.0488 lb/in³	ASTM D792
Filler Content	10 %	10 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	98	98	ASTM D785
Tensile Strength	117 MPa	17000 psi	ASTM D638
Elongation at Break	3.5 %	3.5 %	Flexural Strain; ASTM D790
	4.9 %	4.9 %	ASTM D638
Tensile Modulus	3.45 GPa	500 ksi	ASTM D638
Flexural Strength	195 MPa	28300 psi	ASTM D790
Flexural Modulus	7.58 GPa	1100 ksi	ASTM D790
Compressive Strength	172 MPa	25000 psi	10% Deformation; ASTM D695
Compressive Modulus	3.10 GPa	450 ksi	ASTM D695
Izod Impact, Notched	0.294 J/cm	0.550 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Melting Point	343 °C	649 °F	DSC

Descriptive Properties
Color	Black

关键词:
PEEK
供应
Ensinger Tecapeek® XP-119 Compression Molded PEEK Compound
10% Carbon Fiber

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-49818.html

免责声明: 本文 Ensinger Tecapeek® XP-119 Compression Molded PEEK Compound, 10% Carbon Fiber 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络