SABIC Innovative Plastics LNP THERMOCOMP LC003E PEEK

SABIC Innovative Plastics LNP THERMOCOMP LC003E PEEK 物性表: SABIC Innovative Plastics LNP THERMOCOMP LC003E PEEK物性表及特性介绍,SABIC Innovative Plastics LNP THERMOCOMP LC003E PEEK注塑参数详情,如需SABIC Innovative Plastics LNP THERMOCOMP LC003E PEEK下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.33
  • 缺口冲击强度: 0.37
  • 弯曲模量 [MPa]: 9.51
 
Physical PropertiesMetricEnglishComments
Density 1.33 g/cc0.0480 lb/in³ASTM D792
 1.33 g/cc0.0480 lb/in³ISO 1183
Moisture Absorption 0.0700 %0.0700 %50% RH, 24 hrs; ASTM D570
 0.130 %0.130 %23°C / 50% RH; ISO 62
Linear Mold Shrinkage, Flow  0.0020 - 0.0030 cm/cm
@Time 86400 sec
0.0020 - 0.0030 in/in
@Time 24.0 hour
ASTM D955
 0.0028 - 0.0031 cm/cm
@Time 86400 sec
0.0028 - 0.0031 in/in
@Time 24.0 hour
ISO 294
Linear Mold Shrinkage, Transverse  0.0051 - 0.0058 cm/cm
@Time 86400 sec
0.0051 - 0.0058 in/in
@Time 24.0 hour
ISO 294
 0.0050 - 0.0060 cm/cm
@Time 86400 sec
0.0050 - 0.0060 in/in
@Time 24.0 hour
ASTM D955
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 153 MPa22200 psiASTM D638
 163 MPa23600 psiISO 527
Elongation at Break 1.8 %1.8 %ASTM D638
 1.8 %1.8 %ISO 527
Tensile Modulus 10.52 GPa1526 ksi1 mm/min; ISO 527
 11.51 GPa1669 ksi50 mm/min; ASTM D638
Flexural Strength 259 MPa37600 psiASTM D790
 263 MPa38100 psiISO 178
Flexural Modulus 9.51 GPa1380 ksiASTM D790
 9.85 GPa1430 ksiISO 178
Izod Impact, Notched 0.370 J/cm0.693 ft-lb/inASTM D256
Izod Impact, Unnotched 4.00 J/cm7.49 ft-lb/inASTM D4812
Izod Impact, Notched (ISO) 4.00 kJ/m²1.90 ft-lb/in²80*10*4; ISO 180/1A
Izod Impact, Unnotched (ISO) 29.0 kJ/m²13.8 ft-lb/in²80*10*4; ISO 180/1U
Dart Drop, Total Energy 4.00 J2.95 ft-lbInstrumented Impact Energy @ peak; ASTM D3763
Impact Test 1.00 J0.738 ft-lbMultiaxial Impact; ISO 6603
 
Electrical PropertiesMetricEnglishComments
Surface Resistance 1000 - 1.00e+7 ohm1000 - 1.00e+7 ohmASTM D257
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow  51.9 µm/m-°C
@Temperature -40.0 - 40.0 °C
28.8 µin/in-°F
@Temperature -40.0 - 104 °F
ISO 11359-2
 52.0 µm/m-°C
@Temperature -40.0 - 40.0 °C
28.9 µin/in-°F
@Temperature -40.0 - 104 °F
ASTM E 831
CTE, linear, Transverse to Flow  53.6 µm/m-°C
@Temperature -40.0 - 40.0 °C
29.8 µin/in-°F
@Temperature -40.0 - 104 °F
ASTM E 831
 53.6 µm/m-°C
@Temperature -40.0 - 40.0 °C
29.8 µin/in-°F
@Temperature -40.0 - 104 °F
ISO 11359-2
Deflection Temperature at 1.8 MPa (264 psi) 298 °C568 °FFlatw 80*10*4 sp=64mm; ISO 75/Af
 270 °C
@Thickness 3.20 mm
518 °F
@Thickness 0.126 in
unannealed; ASTM D648

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-50242.html

免责声明: 本文 SABIC Innovative Plastics LNP THERMOCOMP LC003E PEEK 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4