SABIC Innovative Plastics LNP Thermocomp LF003E PEEK

SABIC Innovative Plastics LNP Thermocomp LF003E PEEK 物性表: SABIC Innovative Plastics LNP Thermocomp LF003E PEEK物性表及特性介绍,SABIC Innovative Plastics LNP Thermocomp LF003E PEEK注塑参数详情,如需SABIC Innovative Plastics LNP Thermocomp LF003E PEEK下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.39
  • 缺口冲击强度: 0.53
  • 拉伸强度 [MPa]: 125.0
  • 弯曲模量 [MPa]: 7.00
  • 热变形温度 [℃]: 325.0
 
Physical PropertiesMetricEnglishComments
Density 1.39 g/cc0.0502 lb/in³ASTM D 792
 1.39 g/cc0.0502 lb/in³ISO 1183
Linear Mold Shrinkage, Flow  0.0079 cm/cm
@Time 86400 sec
0.0079 in/in
@Time 24.0 hour
ISO 294
 0.0080 cm/cm
@Time 86400 sec
0.0080 in/in
@Time 24.0 hour
ASTM D 955
Linear Mold Shrinkage, Transverse  0.010 cm/cm
@Time 86400 sec
0.010 in/in
@Time 24.0 hour
ASTM D 955
 0.010 cm/cm
@Time 86400 sec
0.010 in/in
@Time 24.0 hour
ISO 294
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break 125 MPa18100 psiISO 527
 136 MPa19700 psiASTM D 638
Tensile Strength, Yield 125 MPa18100 psiISO 527
 136 MPa19700 psiASTM D 638
Elongation at Break 2.4 %2.4 %ISO 527
 3.1 %3.1 %ASTM D 638
Elongation at Yield 2.4 %2.4 %ISO 527
 3.0 %3.0 %ASTM D 638
Tensile Modulus 6.93 GPa1010 ksi1 mm/min; ISO 527
Flexural Strength 199 MPa28900 psiASTM D 790
 209 MPa30300 psiISO 178
Flexural Modulus 7.00 GPa1020 ksiISO 178
Izod Impact, Notched 0.530 J/cm
@Temperature 23.0 °C
0.993 ft-lb/in
@Temperature 73.4 °F
ASTM D 256
Izod Impact, Unnotched 8.54 J/cm
@Temperature 23.0 °C
16.0 ft-lb/in
@Temperature 73.4 °F
ASTM D 4812
Izod Impact, Notched (ISO) 6.00 kJ/m²
@Temperature 23.0 °C
2.86 ft-lb/in²
@Temperature 73.4 °F
80*10*4; ISO 180/1A
Izod Impact, Unnotched (ISO) 54.0 kJ/m²
@Temperature 23.0 °C
25.7 ft-lb/in²
@Temperature 73.4 °F
80*10*4; ISO 180/1U
Impact Test 3.00 J2.21 ft-lbMultiaxial Impact; ISO 6603
 15.0 J
@Temperature 23.0 °C
11.1 ft-lb
@Temperature 73.4 °F
Instrumented Impact Energy @ peak; ASTM D 3763
 
Thermal PropertiesMetricEnglishComments
CTE, linear, Parallel to Flow  48.0 µm/m-°C
@Temperature -40.0 - 40.0 °C
26.7 µin/in-°F
@Temperature -40.0 - 104 °F
ISO 11359-2
 48.6 µm/m-°C
@Temperature -40.0 - 40.0 °C
27.0 µin/in-°F
@Temperature -40.0 - 104 °F
ASTM E 831
CTE, linear, Transverse to Flow  30.6 µm/m-°C
@Temperature -40.0 - 40.0 °C
17.0 µin/in-°F
@Temperature -40.0 - 104 °F
ASTM E 831
 31.0 µm/m-°C
@Temperature -40.0 - 40.0 °C
17.2 µin/in-°F
@Temperature -40.0 - 104 °F
ISO 11359-2
Deflection Temperature at 0.46 MPa (66 psi) 325 °C617 °FFlatw 80*10*4 sp=64mm; ISO 75/Bf
 328 °C
@Thickness 3.20 mm
622 °F
@Thickness 0.126 in
unannealed; ASTM D 648
Deflection Temperature at 1.8 MPa (264 psi) 244 °C471 °FFlatw 80*10*4 sp=64mm; ISO 75/Af
 258 °C
@Thickness 3.20 mm
496 °F
@Thickness 0.126 in
unannealed; ASTM D 648

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-50285.html

免责声明: 本文 SABIC Innovative Plastics LNP Thermocomp LF003E PEEK 仅代表作者个人观点,中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容,其版权均由原作者和资料提供方所拥有!如因作品版权问题需要处理,请与我们联络

塑胶原料之家,专业塑料网站、原料报价网站,免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4