塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PA66 42A NC010 具高抗张强度

PA66 42A NC010 具高抗张强度

PA66 42A NC010 的收缩率在1%~2%之间，PA66 42A NC010加入玻璃纤维添加剂可以将收缩率降低到0.2%~1% 。PA66 42A NC010收缩率在流程方向和与流程方向相垂直方向上的相异是较大的。PA66对许多溶剂具有抗溶性，但对酸和其它一些氯化剂的抵抗力较弱。
 PA66 42A NC010 物理化学性：PA66塑胶原料为半透明或不透明乳白包或带黄色颗粒状结晶形聚合物，具有可塑性。密度（g/cm3） 1．10-1．14；拉伸强度(MPa) 60. 0-80．0；洛氏硬度118；熔点252℃；脆化温度-30℃；热分解温度大于350℃；连续耐热80-120℃；冲击强度（kJ/m2） 60-100；静弯曲强度(MPa) 1 00-120；马丁耐热(℃) 50-60；弯曲弹性模量 (MPa) 2000～3000；体积电阻率（Ωcm） 1.83×1015；平衡吸水率2．5%；介电常数 1．63。
 物性表：
Physical Properties Metric English Comments
Density  1.01 g/cc 0.0365 lb/in³  
  1.14 g/cc 0.0412 lb/in³ DAM; ISO 1183
Water Absorption  8.5 %
@Thickness 2.00 mm		 8.5 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  2.60 %
@Thickness 2.00 mm		 2.60 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Viscosity    84550.6 cP
@Shear Rate 5000 1/s,
Temperature 300 °C		 84550.6 cP
@Shear Rate 5000 1/s,
Temperature 572 °F		 ISO 11403-1 -2
  95850.6 cP
@Shear Rate 5000 1/s,
Temperature 290 °C		 95850.6 cP
@Shear Rate 5000 1/s,
Temperature 554 °F		 ISO 11403-1 -2
  108807 cP
@Shear Rate 5000 1/s,
Temperature 280 °C		 108807 cP
@Shear Rate 5000 1/s,
Temperature 536 °F		 ISO 11403-1 -2
  286327 cP
@Shear Rate 500 1/s,
Temperature 300 °C		 286327 cP
@Shear Rate 500 1/s,
Temperature 572 °F		 ISO 11403-1 -2
  369593 cP
@Shear Rate 500 1/s,
Temperature 290 °C		 369593 cP
@Shear Rate 500 1/s,
Temperature 554 °F		 ISO 11403-1 -2
  438726 cP
@Shear Rate 10.0 1/s,
Temperature 300 °C		 438726 cP
@Shear Rate 10.0 1/s,
Temperature 572 °F		 ISO 11403-1 -2
  471591 cP
@Shear Rate 500 1/s,
Temperature 280 °C		 471591 cP
@Shear Rate 500 1/s,
Temperature 536 °F		 ISO 11403-1 -2
  655092 cP
@Shear Rate 10.0 1/s,
Temperature 290 °C		 655092 cP
@Shear Rate 10.0 1/s,
Temperature 554 °F		 ISO 11403-1 -2
  1.01273e+6 cP
@Shear Rate 10.0 1/s,
Temperature 280 °C		 1.01273e+6 cP
@Shear Rate 10.0 1/s,
Temperature 536 °F		 ISO 11403-1 -2
Viscosity Test  280 cm³/g 280 cm³/g DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow  0.014 cm/cm 0.014 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.014 cm/cm 0.014 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Stress    2.00 MPa
@Strain 0.1575 %,
Time 3600 sec		 290 psi
@Strain 0.1575 %,
Time 1.00 hour		 50%RH; isochronous; ISO 11403-1 -2
  2.00 MPa
@Strain 0.183167 %,
Time 36000 sec		 290 psi
@Strain 0.183167 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  2.00 MPa
@Strain 0.224 %,
Time 360000 sec		 290 psi
@Strain 0.224 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  2.00 MPa
@Strain 0.355833 %,
Time 3.60e+7 sec		 290 psi
@Strain 0.355833 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  2.00 MPa
@Strain 0.278833 %,
Time 3.60e+6 sec		 290 psi
@Strain 0.278833 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 2.275 %,
Time 3.60e+6 sec		 1740 psi
@Strain 2.275 %,
Time 1000 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 2.91667 %,
Time 3.60e+7 sec		 1740 psi
@Strain 2.91667 %,
Time 10000 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 1.77333 %,
Time 360000 sec		 1740 psi
@Strain 1.77333 %,
Time 100 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Strain 1.45833 %,
Time 36000 sec		 1740 psi
@Strain 1.45833 %,
Time 10.0 hour		 50%RH; isochronous; ISO 11403-1 -2
  12.0 MPa
@Time 3600 sec,
Strain 1.19 %		 1740 psi
@Time 1.00 hour,
Strain 1.19 %		 50%RH; isochronous; ISO 11403-1 -2
Tensile Strength, Yield  55.0 MPa 7980 psi 50%RH; ISO 527-1/-2
  83.0 MPa 12000 psi DAM; ISO 527-1/-2
Elongation at Break  >= 50 % >= 50 % DAM; Nominal; ISO 527-1/-2
  >= 50 % >= 50 % 50%RH; Nominal; ISO 527-1/-2
Elongation at Yield  4.4 % 4.4 % DAM; ISO 527-1/-2
  27 % 27 % 50%RH; ISO 527-1/-2
Tensile Modulus  1.30 GPa 189 ksi 50%RH; ISO 527-1/-2
  3.10 GPa 450 ksi DAM; ISO 527-1/-2
Flexural Modulus  1.07 GPa 155 ksi 50%RH; ISO 178
  2.80 GPa 406 ksi DAM; ISO 178
Shear Modulus  0.1393 GPa
@Temperature 150 °C		 20.20 ksi
@Temperature 302 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.1594 GPa
@Temperature 110 °C		 23.12 ksi
@Temperature 230 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.4312 GPa
@Temperature 60.0 °C		 62.54 ksi
@Temperature 140 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.9147 GPa
@Temperature 10.0 °C		 132.7 ksi
@Temperature 50.0 °F		 DAM; Dynamic; ISO 11403-1 -2
  0.9608 GPa
@Temperature -20.0 °C		 139.4 ksi
@Temperature -4.00 °F		 DAM; Dynamic; ISO 11403-1 -2
  1.0372 GPa
@Temperature -50.0 °C		 150.44 ksi
@Temperature -58.0 °F		 DAM; Dynamic; ISO 11403-1 -2
Shear Strength    0.00438726 MPa
@Shear Rate 10.0 1/s,
Temperature 300 °C		 0.636319 psi
@Shear Rate 10.0 1/s,
Temperature 572 °F		 ISO 11403-1 -2
  0.00655092 MPa
@Shear Rate 10.0 1/s,
Temperature 290 °C		 0.950132 psi
@Shear Rate 10.0 1/s,
Temperature 554 °F		 ISO 11403-1 -2
  0.0101273 MPa
@Shear Rate 10.0 1/s,
Temperature 280 °C		 1.46884 psi
@Shear Rate 10.0 1/s,
Temperature 536 °F		 ISO 11403-1 -2
  0.143164 MPa
@Shear Rate 500 1/s,
Temperature 300 °C		 20.7642 psi
@Shear Rate 500 1/s,
Temperature 572 °F		 ISO 11403-1 -2
  0.184796 MPa
@Shear Rate 500 1/s,
Temperature 290 °C		 26.8024 psi
@Shear Rate 500 1/s,
Temperature 554 °F		 ISO 11403-1 -2
  0.235796 MPa
@Shear Rate 500 1/s,
Temperature 280 °C		 34.1994 psi
@Shear Rate 500 1/s,
Temperature 536 °F		 ISO 11403-1 -2
  0.422753 MPa
@Shear Rate 5000 1/s,
Temperature 300 °C		 61.3152 psi
@Shear Rate 5000 1/s,
Temperature 572 °F		 ISO 11403-1 -2
  0.479253 MPa
@Shear Rate 5000 1/s,
Temperature 290 °C		 69.5099 psi
@Shear Rate 5000 1/s,
Temperature 554 °F		 ISO 11403-1 -2
  0.544035 MPa
@Shear Rate 5000 1/s,
Temperature 280 °C		 78.9057 psi
@Shear Rate 5000 1/s,
Temperature 536 °F		 ISO 11403-1 -2
Izod Impact, Notched (ISO)  6.00 kJ/m² 2.86 ft-lb/in² DAM; ISO 180/1A
  23.0 kJ/m² 10.9 ft-lb/in² 50%RH; ISO 180/1A
  6.00 kJ/m²
@Temperature -30.0 °C		 2.86 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 180/1A
  7.00 kJ/m²
@Temperature -30.0 °C		 3.33 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 180/1A
Izod Impact, Unnotched (ISO)  NB NB DAM; ISO 180/1U
  NB NB 50%RH; ISO 180/1U
  NB
@Temperature -30.0 °C		 NB
@Temperature -22.0 °F		 DAM; ISO 180/1U
  NB
@Temperature -30.0 °C		 NB
@Temperature -22.0 °F		 50%RH; ISO 180/1U
Charpy Impact Unnotched  NB NB DAM; ISO 179/1eU
  NB NB 50%RH; ISO 179/1eU
  NB
@Temperature -30.0 °C		 NB
@Temperature -22.0 °F		 DAM; ISO 179/1eU
  NB
@Temperature -30.0 °C		 NB
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
Charpy Impact, Notched  0.600 J/cm² 2.86 ft-lb/in² DAM; ISO 179/1eA
  2.00 J/cm² 9.52 ft-lb/in² 50%RH; ISO 179/1eA
   0.400 J/cm²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eA
  0.600 J/cm²
@Temperature -30.0 °C		 2.86 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
Tensile Creep Modulus, 1 hour    967.742 MPa
@Pressure 14.0 MPa,
Temperature 23.0 °C		 140359 psi
@Pressure 2030 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1008.4 MPa
@Pressure 12.0 MPa,
Temperature 23.0 °C		 146260 psi
@Pressure 1740 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1051.12 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 152452 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1095.39 MPa
@Pressure 8.00 MPa,
Temperature 23.0 °C		 158873 psi
@Pressure 1160 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1146.88 MPa
@Pressure 6.00 MPa,
Temperature 23.0 °C		 166341 psi
@Pressure 870 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1207.24 MPa
@Pressure 4.00 MPa,
Temperature 23.0 °C		 175096 psi
@Pressure 580 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1269.84 MPa
@Pressure 2.00 MPa,
Temperature 23.0 °C		 184175 psi
@Pressure 290 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
Tensile Creep Modulus, 1000 hours    496.454 MPa
@Pressure 14.0 MPa,
Temperature 23.0 °C		 72004.7 psi
@Pressure 2030 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  527.473 MPa
@Pressure 12.0 MPa,
Temperature 23.0 °C		 76503.6 psi
@Pressure 1740 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  561.196 MPa
@Pressure 10.0 MPa,
Temperature 23.0 °C		 81394.7 psi
@Pressure 1450 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  596.273 MPa
@Pressure 8.00 MPa,
Temperature 23.0 °C		 86482.2 psi
@Pressure 1160 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  635.123 MPa
@Pressure 6.00 MPa,
Temperature 23.0 °C		 92117.0 psi
@Pressure 870 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  677.583 MPa
@Pressure 4.00 MPa,
Temperature 23.0 °C		 98275.3 psi
@Pressure 580 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  717.274 MPa
@Pressure 2.00 MPa,
Temperature 23.0 °C		 104032 psi
@Pressure 290 psi,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
 
Electrical Properties Metric English Comments
Volume Resistivity  1.00e+13 ohm-cm 1.00e+13 ohm-cm 50%RH; IEC 60093
  1.00e+15 ohm-cm 1.00e+15 ohm-cm DAM; IEC 60093
Dielectric Constant    3.6
@Frequency 1.00e+6 Hz		 3.6
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  4.2
@Frequency 1.00e+6 Hz		 4.2
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  4.3
@Frequency 100 Hz		 4.3
@Frequency 100 Hz		 DAM; IEC 60250
  10.3
@Frequency 100 Hz		 10.3
@Frequency 100 Hz		 50%RH; IEC 60250
Dielectric Strength  30.5 kV/mm 775 kV/in DAM; IEC 60243-1
Dissipation Factor    0.015
@Frequency 100 Hz		 0.015
@Frequency 100 Hz		 DAM; IEC 60250
  0.024
@Frequency 1.00e+6 Hz		 0.024
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  0.075
@Frequency 1.00e+6 Hz		 0.075
@Frequency 1.00e+6 Hz		 50%RH; IEC 60250
  0.20
@Frequency 100 Hz		 0.20
@Frequency 100 Hz		 50%RH; IEC 60250
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  100 µm/m-°C 55.6 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  100 µm/m-°C 55.6 µin/in-°F DAM; ISO 11359-1/-2
Specific Heat Capacity  2.79 J/g-°C 0.667 BTU/lb-°F  
Thermal Conductivity  0.160 W/m-K 1.11 BTU-in/hr-ft²-°F of melt
Melting Point  262 °C 504 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  200 °C 392 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  70.0 °C 158 °F DAM; ISO 75-1/-2
Vicat Softening Point  244 °C 471 °F DAM; 50°C/h 50N; ISO 306
Glass Transition Temp, Tg  70.0 °C 158 °F DAM; 10°C/min; ISO 11357-1/-2
Flammability, UL94  HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 DAM; IEC 60695-11-10
  HB
@Thickness 0.700 mm		 HB
@Thickness 0.0276 in		 DAM; IEC 60695-11-10
Oxygen Index  28 % 28 % DAM; ISO 4589-1/-2
 
Descriptive Properties
Additives Release agent  
Delivery form Pellets  
Part Marking Code >PA66< ISO 11469
Processing Casting  
  Coatable  
  Film Extrusion  
  Injection Moulding  
  Other Extrusion  
  Profile Extrusion  
  Sheet Extrusion  
Regional Availability North America  
  South and Central America  
Resin Identification PA66  
UL recognition UL DAM
 
化学式：[-NH（CH2）6－NHCO(CH2)4CO]n－    性状为半透明或不透明乳白色结晶形聚合物，具有可塑性。密度1．15g／cm3。熔点252℃。脆化温度-30℃。热分解温度大于350℃。 连续耐热80-120℃,平衡吸水率2．5％。能耐酸、碱、大多数无机盐水溶液、卤代烷、烃类、酯类、酮类等腐蚀，但易溶于苯酚、甲酸等极性溶剂。具有优良的耐磨性、自润滑性，机械强度较高。
颗粒08
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生  
手  机：13501802636   
QQ    ：205730283  
邮 箱 ：205730283@qq.com 

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-25472.html

免责声明: 本文 PA66 42A NC010 具高抗张强度 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4