- 缺口冲击强度: 0.214
- 弯曲模量 [MPa]: 1.45
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Solids Content | 100 % | 100 % | |||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore D | >= 80 | >= 80 | |||
| Tensile Strength at Break | 35.2 MPa | 5100 psi | |||
| Flexural Strength | 57.2 MPa | 8300 psi | |||
| Flexural Modulus | 1.45 GPa | 210 ksi | |||
| Compressive Strength | 92.4 MPa | 13400 psi | |||
| Compressive Modulus | 1.86 GPa | 270 ksi | |||
| Izod Impact, Notched | 0.214 J/cm | 0.400 ft-lb/in | |||
| Thermal Properties | Metric | English | Comments | ||
| Maximum Service Temperature, Air | 70.0 °C | 158 °F | Deflection Temp at unknown load | ||
| Processing Properties | Metric | English | Comments | ||
| Pot Life | 12 - 14 min | 12 - 14 min | |||
| Shelf Life | >= 12.0 Month | >= 12.0 Month | |||
| Descriptive Properties | |||||
| Color | Light Gray | ||||
| Hardening Time (min) | 6-240 | depending on temp. | |||
| Ultimate Elongation (%) | 3.9 | ||||
| Viscosity | thixotropic, no-slump paste | ||||