- 吸水率 [%]: 0.22
- 缺口冲击强度: 0.4
- 弯曲强度 [MPa]: 58.61
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Water Absorption | 0.22 % | 0.22 % | in 24 hours. |
| Viscosity Measurement | 1600 | 1600 | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Shore D | 83 | 83 | |
| Tensile Strength, Ultimate | 58.61 MPa | 8501 psi | |
| Elongation at Break | 5.5 % | 5.5 % | |
| Flexural Strength | 94.8 MPa | 13700 psi | |
| Izod Impact, Notched | 0.400 J/cm | 0.749 ft-lb/in | |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 4.80e+11 ohm-cm @Temperature 93.3 °C | 4.80e+11 ohm-cm @Temperature 200 °F | |
| 6.20e+14 ohm-cm @Temperature 65.6 °C | 6.20e+14 ohm-cm @Temperature 150 °F | ||
| 3.60e+15 ohm-cm @Temperature 25.0 °C | 3.60e+15 ohm-cm @Temperature 77.0 °F | ||
| Dielectric Constant | 3.33 @Frequency 1e+6 Hz | 3.33 @Frequency 1e+6 Hz | |
| Dissipation Factor | 0.017 @Frequency 1e+6 Hz | 0.017 @Frequency 1e+6 Hz | |
| Thermal Properties | Metric | English | Comments |
| Maximum Service Temperature, Air | 73.0 °C | 163 °F | Deflection temperature; load unknown. |
| Processing Properties | Metric | English | Comments |
| Processing Temperature | 25.0 °C | 77.0 °F | Curing time: 16 hours; Postcure: 2 hours/100°C (212°F) |