- 密度 [g/cm3]: 1.82
- 吸水率 [%]: 0.1
- 缺口冲击强度: 0.29
- 弯曲强度 [MPa]: 55.0
- 弯曲模量 [MPa]: 13.8
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Bulk Density | 0.800 g/cc | 0.0289 lb/in³ | Powder; ASTM D1895 | ||
| Density | 1.82 g/cc | 0.0658 lb/in³ | ASTM D-792 | ||
| Water Absorption | 0.10 % | 0.10 % | 48 hour; ASTM D570 | ||
| Linear Mold Shrinkage | 0.0010 - 0.0030 cm/cm | 0.0010 - 0.0030 in/in | ASTM D955 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength, Ultimate | 55.0 MPa | 7980 psi | ASTM D638 | ||
| Flexural Strength | 79.0 MPa | 11500 psi | ASTM D790 | ||
| Flexural Modulus | 13.8 GPa | 2000 ksi | ASTM D790 | ||
| Compressive Strength | 207 MPa | 30000 psi | ASTM D695 | ||
| Izod Impact, Notched | 0.290 J/cm | 0.543 ft-lb/in | ASTM D256A | ||
| Electrical Properties | Metric | English | Comments | ||
| Dielectric Strength | 13.7 kV/mm | 348 kV/in | ST; ASTM D149 | ||
| Arc Resistance | 180 sec | 180 sec | ASTM D495 | ||
| Thermal Properties | Metric | English | Comments | ||
| Deflection Temperature at 1.8 MPa (264 psi) | >= 282 °C | >= 540 °F | Post Baked; ASTM D648A | ||
| Descriptive Properties | |||||
| Available Molding Grades | Compression, Transfer, Injection | ||||
| Color | Black | ||||
| Form | Granular | ||||