- 弯曲模量 [MPa]: 14.0
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 1.60 - 1.80 g/cc | 1.60 - 1.80 g/cc | IEC 1212-2 8.1 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Tensile Strength | >= 100 MPa | >= 14500 psi | IEC 1212-2 5.7 | ||
| Flexural Strength | >= 140 MPa | >= 20300 psi | At Break, Perpendicular to laminations; IEC 1212-2 5.1 | ||
| Flexural Modulus | >= 14.0 GPa | >= 2030 ksi | IEC 1212-2 5.2 | ||
| Izod Impact, Unnotched (ISO) | >= 29.0 kJ/m² | >= 13.8 ft-lb/in² | Parallel to laminations; IEC 1212-2 5.5.3 | ||
| Charpy Impact Unnotched | >= 2.50 J/cm² | >= 11.9 ft-lb/in² | Parallel to laminations; IEC 1212-2 5.5.2 | ||
| Electrical Properties | Metric | English | Comments | ||
| Insulation Resistance | >= 1.00e+8 ohm | >= 1.00e+8 ohm | After immersion in water; IEC 1212-2 6.3 | ||
| Dielectric Constant | <= 5.0 @Frequency 48.0 - 62.0 Hz | <= 5.0 @Frequency 48.0 - 62.0 Hz | IEC 1212-2 6.2 | ||
| Dielectric Breakdown | >= 20000 V @Temperature 90.0 °C | >= 20000 V @Temperature 194 °F | In oil, parallel to laminations; IEC 1212-2 6.2 | ||
| Comparative Tracking Index | >= 100 V | >= 100 V | IEC 1212-2 6.4 | ||
| Descriptive Properties | |||||
| Thermal Endurance | 120 T.I. | IEC 1212-2 7.1 | |||
| Water Absorption | < 310 mg | IEC 1212-2 8.2; Test piece 50 x 50 x 10 mm | |||