- 密度 [g/cm3]: 1.47
- 吸水率 [%]: 0.06
- 缺口冲击强度: 0.45
- 断裂伸长率 [%]: 151
- 弯曲强度 [MPa]: 108.5
- 弯曲模量 [MPa]: 6.39
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.47 g/cc | 0.0531 lb/in³ | ASTM D792 |
| Water Absorption | 0.060 % | 0.060 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0022 cm/cm | 0.0022 in/in | ATM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 108.5 MPa | 15740 psi | ASTM D638 |
| Elongation at Break | 1.9 % | 1.9 % | ASTM D638 |
| Tensile Modulus | 6.26 GPa | 908 ksi | ASTM D638 |
| Flexural Yield Strength | 151 MPa | 21900 psi | ASTM D790 |
| Flexural Modulus | 6.39 GPa | 927 ksi | ASTM D790 |
| Compressive Yield Strength | 150.4 MPa | 21810 psi | ASTM D695 |
| Izod Impact, Notched | 0.450 J/cm | 0.843 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 4.26e+17 ohm-cm | 4.26e+17 ohm-cm | ASTM D257 |
| Dielectric Constant | 2.9 @Frequency 1e+6 Hz | 2.9 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 15.9 kV/mm | 404 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.015 @Frequency 1e+6 Hz | 0.015 @Frequency 1e+6 Hz | ASTM D150 |
| Arc Resistance | 110 sec | 110 sec | ASTM D495 |
| Comparative Tracking Index | 225 V | 225 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 203 °C | 397 °F | ASTM D648 |
| Flammability, UL94 | HB @Thickness 1.47 mm | HB @Thickness 0.0579 in | |