- 密度 [g/cm3]: 1.79
- 吸水率 [%]: 0.04
- 缺口冲击强度: 0.62
- 断裂伸长率 [%]: 169.6
- 弯曲强度 [MPa]: 108.4
- 弯曲模量 [MPa]: 10.51
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.79 g/cc | 0.0647 lb/in³ | ASTM D792 |
| Water Absorption | 0.040 % | 0.040 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0014 cm/cm | 0.0014 in/in | ATM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 108.4 MPa | 15720 psi | ASTM D638 |
| Elongation at Break | 1.47 % | 1.47 % | ASTM D638 |
| Tensile Modulus | 11.21 GPa | 1626 ksi | ASTM D638 |
| Flexural Yield Strength | 169.6 MPa | 24600 psi | ASTM D790 |
| Flexural Modulus | 10.51 GPa | 1524 ksi | ASTM D790 |
| Compressive Yield Strength | 155.3 MPa | 22520 psi | ASTM D695 |
| Izod Impact, Notched | 0.620 J/cm | 1.16 ft-lb/in | ASTM D256 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 4.63e+16 ohm-cm | 4.63e+16 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.5 @Frequency 1e+6 Hz | 3.5 @Frequency 1e+6 Hz | ASTM D150 |
| Dielectric Strength | 15.1 kV/mm | 384 kV/in | Short Time; ASTM D149 |
| Dissipation Factor | 0.012 @Frequency 1e+6 Hz | 0.012 @Frequency 1e+6 Hz | ASTM D150 |
| Arc Resistance | 40 sec | 40 sec | ASTM D495 |
| Comparative Tracking Index | 200 V | 200 V | ASTM D3638 |
| Thermal Properties | Metric | English | Comments |
| Deflection Temperature at 1.8 MPa (264 psi) | 220 °C | 428 °F | ASTM D648 |
| Flammability, UL94 | V-0 @Thickness 1.47 mm | V-0 @Thickness 0.0579 in | |