- 熔体流动速率 [g/10min]: 1.0
- 密度 [g/cm3]: 0.918
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.918 g/cc | 0.0332 lb/in³ | ASTM D792 |
| Thickness | 20.3 microns | 0.800 mil | |
| Melt Flow | 1.0 g/10 min @Load 2.16 kg, Temperature 190 °C | 1.0 g/10 min @Load 4.76 lb, Temperature 374 °F | ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
| Film Tensile Strength at Yield, MD | 15.98 MPa | 2318 psi | ASTM D882 |
| Film Tensile Strength at Yield, TD | 15.42 MPa | 2237 psi | ASTM D882 |
| Film Elongation at Break, MD | 577 % | 577 % | ASTM D882 |
| Film Elongation at Break, TD | 800 % | 800 % | ASTM D882 |
| Secant Modulus, MD | 0.20403 GPa | 29.592 ksi | 2% Secant; ASTM D882 |
| Secant Modulus, TD | 0.233243 GPa | 33.8295 ksi | 2% Secant; ASTM D882 |
| Impact | 9.0 | 9.0 | [lbf]; Puncture Resistance Force; Dow Method |
| 253 | 253 | [ft-lbf/in3]; Puncture Resistance; Dow Method | |
| 3564 | 3564 | [ft-lbf/in3]; Toughness MD; ASTM D882 | |
| 4118 | 4118 | [ft-lbf/in3]; Toughness TD; ASTM D882 | |
| Puncture Energy | 3.39 J | 2.50 ft-lb | Dow Method |
| Elmendorf Tear Strength MD | 296 g | 296 g | Method B; ASTM D1922 |
| Elmendorf Tear Strength TD | 674 g | 674 g | Method B; ASTM D1922 |
| Elmendorf Tear Strength, MD | 14.6 g/micron | 370 g/mil | ASTM D1922 |
| Elmendorf Tear Strength, TD | 33.17 g/micron | 842.5 g/mil | ASTM D1922 |
| Dart drop Test | 94.0 g | 0.207 lb | Method A; ASTM D1709 |
| <= 100 g | <= 0.221 lb | Method B; ASTM D1709 | |
| Film Tensile Strength at Break, MD | 60.68 MPa | 8801 psi | ASTM D882 |
| Film Tensile Strength at Break, TD | 48.17 MPa | 6987 psi | ASTM D882 |
| Heat Seal Strength, Ultimate | 9.80 N | 2.20 lb (f) | at 150°C, 0.5 sec dwell, 40 psi bar pressure, pull speed 10 (in./min.); Dow Method |
| Heat Seal Strength Initiation Temperature | 110 °C | 230 °F | 1 lb/in heat seal strength; 0.5 sec dwell, 40 psi bar pressure, pull speed 10 (in./min.); Dow Method |
| Thermal Properties | Metric | English | Comments |
| Melting Point | 124 °C | 255 °F | Dow Method (DSC) |
| Vicat Softening Point | 103 °C | 217 °F | ASTM D1525 |
| Optical Properties | Metric | English | Comments |
| Haze | 12 % | 12 % | ASTM D1003 |
| Gloss | 50 % | 50 % | 45°; ASTM D2457 |
| 62 % | 62 % | 20°; ASTM D2457 | |