塑胶原料之家
  1. 首页
  2. 英文物性
  3. PA66
  4. DuPont Performance Polymers Zytel® FR70M30V0 BK010 Nylon 66

DuPont Performance Polymers Zytel® FR70M30V0 BK010 Nylon 66

DuPont Performance Polymers Zytel® FR70M30V0 BK010 Nylon 66 物性表: DuPont Performance Polymers Zytel® FR70M30V0 BK010 Nylon 66物性表及特性介绍,DuPont Performance Polymers Zytel® FR70M30V0 BK010 Nylon 66注塑参数详情,如需DuPont Performance Polymers Zytel® FR70M30V0 BK010 Nylon 66下载, 可到相关下载区下载
  • 密度 [g/cm3]: 1.62
  • 缺口冲击强度: 2.0
 
Physical PropertiesMetricEnglishComments
Density 1.62 g/cc0.0585 lb/in³DAM; ISO 1183
Filler Content 30 %30 %DAM
Linear Mold Shrinkage, Flow 0.0080 cm/cm
@Thickness 2.00 mm		0.0080 in/in
@Thickness 0.0787 in		Parallel; DAM; ISO 294-4
Linear Mold Shrinkage, Transverse 0.0090 cm/cm
@Thickness 2.00 mm		0.0090 in/in
@Thickness 0.0787 in		Normal; DAM; ISO 294-4
 
Mechanical PropertiesMetricEnglishComments
Tensile Strength at Break  45.0 MPa
@Temperature 23.0 °C		6530 psi
@Temperature 73.4 °F		50%RH; ISO 527
 65.0 MPa
@Temperature 23.0 °C		9430 psi
@Temperature 73.4 °F		DAM; ISO 527
Elongation at Break  2.0 %
@Temperature 23.0 °C		2.0 %
@Temperature 73.4 °F		DAM; ISO 527
 3.5 %
@Temperature 23.0 °C		3.5 %
@Temperature 73.4 °F		50%RH; ISO 527
Tensile Modulus  4.00 GPa
@Temperature 23.0 °C		580 ksi
@Temperature 73.4 °F		50%RH; ISO 527
 6.20 GPa
@Temperature 23.0 °C		899 ksi
@Temperature 73.4 °F		DAM; ISO 527
Izod Impact, Notched (ISO)  2.00 kJ/m²
@Temperature 23.0 °C		0.952 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 180/1A
 2.50 kJ/m²
@Temperature 23.0 °C		1.19 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 180/1A
Charpy Impact Unnotched  2.00 J/cm²
@Temperature 23.0 °C		9.52 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 179/1eU
 2.50 J/cm²
@Temperature 23.0 °C		11.9 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 179/1eU
Charpy Impact, Notched  0.250 J/cm²
@Temperature 23.0 °C		1.19 ft-lb/in²
@Temperature 73.4 °F		DAM; ISO 179/1eA
 0.250 J/cm²
@Temperature 23.0 °C		1.19 ft-lb/in²
@Temperature 73.4 °F		50%RH; ISO 179/1eA
 
Electrical PropertiesMetricEnglishComments
Comparative Tracking Index  250 - 400 V
@Thickness 1.50 mm		250 - 400 V
@Thickness 0.0591 in		DAM; UL 746A
 250 - 400 V
@Thickness 0.750 mm		250 - 400 V
@Thickness 0.0295 in		DAM; UL 746A
 250 - 400 V
@Thickness 3.00 mm,
Temperature 23.0 °C		250 - 400 V
@Thickness 0.118 in,
Temperature 73.4 °F		DAM; UL 746A
 250 - 400 V
@Thickness 1.00 mm,
Temperature 23.0 °C		250 - 400 V
@Thickness 0.0394 in,
Temperature 73.4 °F		DAM; UL 746A
 
Thermal PropertiesMetricEnglishComments
Deflection Temperature at 1.8 MPa (264 psi) 145 °C293 °FDAM; ISO 75-1/-2
UL RTI, Electrical  105 °C
@Thickness 0.750 mm		221 °F
@Thickness 0.0295 in		DAM; UL 746B
 105 °C
@Thickness 1.00 mm		221 °F
@Thickness 0.0394 in		DAM; UL 746B
 120 °C
@Thickness 3.00 mm		248 °F
@Thickness 0.118 in		DAM; UL 746B
 120 °C
@Thickness 1.50 mm		248 °F
@Thickness 0.0591 in		DAM; UL 746B
UL RTI, Mechanical with Impact  95.0 °C
@Thickness 1.00 mm		203 °F
@Thickness 0.0394 in		DAM; UL 746B
 95.0 °C
@Thickness 0.750 mm		203 °F
@Thickness 0.0295 in		DAM; UL 746B
 105 °C
@Thickness 1.50 mm		221 °F
@Thickness 0.0591 in		DAM; UL 746B
 115 °C
@Thickness 3.00 mm		239 °F
@Thickness 0.118 in		DAM; UL 746B
UL RTI, Mechanical without Impact  105 °C
@Thickness 1.00 mm		221 °F
@Thickness 0.0394 in		DAM; UL 746B
 105 °C
@Thickness 0.750 mm		221 °F
@Thickness 0.0295 in		DAM; UL 746B
 115 °C
@Thickness 3.00 mm		239 °F
@Thickness 0.118 in		DAM; UL 746B
 115 °C
@Thickness 1.50 mm		239 °F
@Thickness 0.0591 in		DAM; UL 746B
Flammability, UL94  V-2
@Thickness 0.750 mm		V-2
@Thickness 0.0295 in		DAM; IEC 60695-11-10
 V-2
@Thickness 0.750 mm		V-2
@Thickness 0.0295 in		DAM; UL94
 V-0
@Thickness 3.00 mm		V-0
@Thickness 0.118 in		DAM; IEC 60695-11-10
 V-0
@Thickness 1.50 mm		V-0
@Thickness 0.0591 in		DAM; IEC 60695-11-10
 V-0
@Thickness 1.00 mm		V-0
@Thickness 0.0394 in		DAM; IEC 60695-11-10
 V-0
@Thickness 1.00 mm		V-0
@Thickness 0.0394 in		DAM; UL94
 V-0
@Thickness 1.50 mm		V-0
@Thickness 0.0591 in		DAM; UL94
 V-0
@Thickness 3.00 mm		V-0
@Thickness 0.118 in		DAM; UL94
 5VA
@Thickness 1.50 mm		5VA
@Thickness 0.0591 in		DAM; IEC 60695-11-20
Glow Wire Test  800 °C
@Thickness 1.50 mm		1470 °F
@Thickness 0.0591 in		DAM; Ignition; IEC 60695-2-13
 800 °C
@Thickness 1.00 mm		1470 °F
@Thickness 0.0394 in		DAM; Ignition; IEC 60695-2-13
 800 °C
@Thickness 3.00 mm		1470 °F
@Thickness 0.118 in		DAM; Ignition; IEC 60695-2-13
 800 °C
@Thickness 0.750 mm		1470 °F
@Thickness 0.0295 in		DAM; Ignition; IEC 60695-2-13
 960 °C
@Thickness 1.50 mm		1760 °F
@Thickness 0.0591 in		DAM; IEC 60695-2-12
 960 °C
@Thickness 3.00 mm		1760 °F
@Thickness 0.118 in		DAM; IEC 60695-2-12
 960 °C
@Thickness 1.00 mm		1760 °F
@Thickness 0.0394 in		DAM; IEC 60695-2-12
 960 °C
@Thickness 0.750 mm		1760 °F
@Thickness 0.0295 in		DAM; IEC 60695-2-12
 
Processing PropertiesMetricEnglishComments
Melt Temperature 263 °C505 °F10°C/min; DAM; ISO 11357-1/-3
 290 °C554 °FDAM; Optimum
 280 - 300 °C536 - 572 °FDAM
Mold Temperature 90.0 °C194 °FDAM; optimum
 70.0 - 110 °C158 - 230 °FDAM
Drying Temperature 80.0 °C176 °FDAM
Dry Time 2.00 - 4.00 hour2.00 - 4.00 hourDAM
Moisture Content <= 0.20 %<= 0.20 %DAM
 
Descriptive Properties
AdditiveFlame RetardantDAM
AppearanceBlack ColorDAM
Drying RecommendedYes, if moisture content of resin exceeds recommended levelDAM
FeaturesChemical Resistance, GoodDAM
 Flame RetardantDAM
FillerMineral fillerDAM
FormsPelletsDAM
GenericNylon 66DAM
Material StatusCurrentDAM
Part Marking Code>PA66-MD30FR(17)<ISO 11469; DAM
Polymer FamilyPolyamideDAM
Polymer TypePA66DAM
Processing MethodInjection MoldingDAM
Product CategoryFlame Retardant ResinsDAM
 Low Warp ResinsDAM
 Mineral Reinforced ResinsDAM
Region Available - GlobalYesDAM
Resin IdentificationPA66-MD30FR(17)ISO 1043; DAM
RoHS ComplianceContact ManufacturerDAM
UsesAppliance ComponentsDAM
 Automotive ApplicationsDAM
 ConnectorsDAM
 Electrical/Electronic ApplicationsDAM
 Industrial ApplicationsDAM

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/wuxingbiao/

本文链接: http://www.su-jiao.com/yuanliaoku/show-45513.html

免责声明: 本文 DuPont Performance Polymers Zytel® FR70M30V0 BK010 Nylon 66 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他物性信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4