塑胶原料之家
  1. 首页
  2. 资讯
  3. 产品资讯
  4. PA66 70G13L NC010 耐磨性

PA66 70G13L NC010 耐磨性

PA66 70G13L NC010 的收缩率在1%~2%之间，PA66 70G13L NC010 加入玻璃纤维添加剂可以将收缩率降低到0.2%~1% 。PA66 70G13L NC010 收缩率在流程方向和与流程方向相垂直方向上的相异是较大的。PA66对许多溶剂具有抗溶性，但对酸和其它一些氯化剂的抵抗力较弱。
 PA66 70G13L NC010 具有良好的耐磨性、耐热性、耐油性及耐化学药品性，还大大降低了原材料的吸水率和收缩率,具有优良的尺寸稳定性及优异的机械强度。能满足静电消散和静电放电(ESD)防护的要求。这些特殊改性材料经特殊配制，适用于从100到1012欧姆/平方(ohms/sq)的表面电阻范围，可用于注塑及挤出等成型。
 物性表：
Physical Properties Metric English Comments
Density  1.23 g/cc 0.0444 lb/in³ DAM; ISO 1183
Water Absorption  7.6 %
@Thickness 2.00 mm		 7.6 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Moisture Absorption  2.20 %
@Thickness 2.00 mm		 2.20 %
@Thickness 0.0787 in		 DAM; Sim. to ISO 62
Water Absorption at Saturation  1.7 % 1.7 % DAM; Immersion 24h; ASTM D570
Viscosity Test  150 cm³/g 150 cm³/g DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow  0.0070 cm/cm 0.0070 in/in DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse  0.012 cm/cm 0.012 in/in DAM; ISO 294-4 2577
 
Mechanical Properties Metric English Comments
Tensile Strength at Break  75.0 MPa 10900 psi 50%RH; ISO 527-1/-2
  120 MPa 17400 psi DAM; ISO 527-1/-2
Tensile Stress    16.074 MPa
@Strain 0.500 %,
Temperature 23.0 °C		 2331.3 psi
@Strain 0.500 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  25.09 MPa
@Strain 0.500 %,
Temperature 23.0 °C		 3639 psi
@Strain 0.500 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  27.636 MPa
@Strain 0.900 %,
Temperature 23.0 °C		 4008.3 psi
@Strain 0.900 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  28.1 MPa
@Strain 0.500 %,
Temperature 0.000 °C		 4080 psi
@Strain 0.500 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  31.4 MPa
@Strain 0.500 %,
Temperature -40.0 °C		 4550 psi
@Strain 0.500 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  32.8 MPa
@Strain 0.500 %,
Temperature -40.0 °C		 4760 psi
@Strain 0.500 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  41.172 MPa
@Strain 1.50 %,
Temperature 23.0 °C		 5971.5 psi
@Strain 1.50 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  50.6 MPa
@Strain 0.900 %,
Temperature 0.000 °C		 7340 psi
@Strain 0.900 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  57.7 MPa
@Strain 1.10 %,
Temperature 0.000 °C		 8370 psi
@Strain 1.10 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  58.02 MPa
@Strain 1.20 %,
Temperature 23.0 °C		 8415 psi
@Strain 1.20 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  59.314 MPa
@Strain 2.60 %,
Temperature 23.0 °C		 8602.8 psi
@Strain 2.60 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  61.9 MPa
@Strain 1.00 %,
Temperature -40.0 °C		 8980 psi
@Strain 1.00 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  66.8 MPa
@Strain 1.20 %,
Temperature 0.000 °C		 9690 psi
@Strain 1.20 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  73.8 MPa
@Strain 1.50 %,
Temperature 0.000 °C		 10700 psi
@Strain 1.50 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  74.8 MPa
@Strain 1.20 %,
Temperature -40.0 °C		 10800 psi
@Strain 1.20 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  76.234 MPa
@Strain 7.00 %,
Temperature 23.0 °C		 11057 psi
@Strain 7.00 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  78.4 MPa
@Strain 1.30 %,
Temperature -40.0 °C		 11400 psi
@Strain 1.30 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  79.3 MPa
@Strain 1.70 %,
Temperature 23.0 °C		 11500 psi
@Strain 1.70 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  86.5 MPa
@Strain 1.60 %,
Temperature 0.000 °C		 12500 psi
@Strain 1.60 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  89.0 MPa
@Strain 2.00 %,
Temperature 0.000 °C		 12900 psi
@Strain 2.00 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  94.05 MPa
@Strain 2.10 %,
Temperature 23.0 °C		 13640 psi
@Strain 2.10 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  98.5 MPa
@Strain 1.70 %,
Temperature -40.0 °C		 14300 psi
@Strain 1.70 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  99.8 MPa
@Strain 1.90 %,
Temperature 0.000 °C		 14500 psi
@Strain 1.90 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  100.6 MPa
@Strain 1.70 %,
Temperature -40.0 °C		 14590 psi
@Strain 1.70 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  119.91 MPa
@Strain 3.10 %,
Temperature 23.0 °C		 17392 psi
@Strain 3.10 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  121 MPa
@Strain 4.50 %,
Temperature 0.000 °C		 17500 psi
@Strain 4.50 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  127.2 MPa
@Strain 2.30 %,
Temperature -40.0 °C		 18450 psi
@Strain 2.30 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
Elongation at Break  3.0 % 3.0 % DAM; ISO 527-1/-2
  13 % 13 % 50%RH; ISO 527-1/-2
Tensile Modulus  3.50 GPa 508 ksi 50%RH; ISO 527-1/-2
  5.50 GPa 798 ksi DAM; ISO 527-1/-2
Flexural Strength  100 MPa 14500 psi 50%RH; ISO 178
  190 MPa 27600 psi DAM; ISO 178
Flexural Modulus  2.90 GPa 421 ksi 50%RH; ISO 178
  4.80 GPa 696 ksi DAM; ISO 178
Secant Modulus    0.833333 GPa
@Strain 6.00 %,
Temperature 80.0 °C		 120.867 ksi
@Strain 6.00 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  0.926667 GPa
@Strain 7.50 %,
Temperature 80.0 °C		 134.404 ksi
@Strain 7.50 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  1.22162 GPa
@Strain 3.70 %,
Temperature 80.0 °C		 177.184 ksi
@Strain 3.70 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1.5125 GPa
@Strain 4.00 %,
Temperature 80.0 °C		 219.37 ksi
@Strain 4.00 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  1.57619 GPa
@Strain 2.10 %,
Temperature 80.0 °C		 228.611 ksi
@Strain 2.10 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1.69627 GPa
@Strain 4.40 %,
Temperature 23.0 °C		 246.027 ksi
@Strain 4.40 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  1.85652 GPa
@Strain 2.30 %,
Temperature 80.0 °C		 269.270 ksi
@Strain 2.30 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  1.87778 GPa
@Strain 0.900 %,
Temperature 80.0 °C		 272.353 ksi
@Strain 0.900 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  1.94 GPa
@Strain 0.500 %,
Temperature 80.0 °C		 281 ksi
@Strain 0.500 %,
Temperature 176 °F		 50%RH; ISO 11403-1 -2
  2.08563 GPa
@Strain 3.20 %,
Temperature 23.0 °C		 302.500 ksi
@Strain 3.20 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  2.27 GPa
@Strain 1.00 %,
Temperature 80.0 °C		 329 ksi
@Strain 1.00 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  2.42 GPa
@Strain 0.500 %,
Temperature 80.0 °C		 351 ksi
@Strain 0.500 %,
Temperature 176 °F		 DAM; ISO 11403-1 -2
  2.64859 GPa
@Strain 1.70 %,
Temperature 23.0 °C		 384.151 ksi
@Strain 1.70 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3.07067 GPa
@Strain 0.900 %,
Temperature 23.0 °C		 445.370 ksi
@Strain 0.900 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3.2148 GPa
@Strain 0.500 %,
Temperature 23.0 °C		 466.27 ksi
@Strain 0.500 %,
Temperature 73.4 °F		 50%RH; ISO 11403-1 -2
  3.35 GPa
@Strain 3.40 %,
Temperature 0.000 °C		 486 ksi
@Strain 3.40 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  4.008 GPa
@Strain 2.50 %,
Temperature 0.000 °C		 581.3 ksi
@Strain 2.50 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  4.06857 GPa
@Strain 2.80 %,
Temperature 23.0 °C		 590.105 ksi
@Strain 2.80 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  4.37087 GPa
@Strain 2.30 %,
Temperature 23.0 °C		 633.951 ksi
@Strain 2.30 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  4.57947 GPa
@Strain 1.90 %,
Temperature 23.0 °C		 664.206 ksi
@Strain 1.90 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  4.74118 GPa
@Strain 1.70 %,
Temperature 0.000 °C		 687.661 ksi
@Strain 1.70 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  4.835 GPa
@Strain 1.20 %,
Temperature 23.0 °C		 701.3 ksi
@Strain 1.20 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  5.018 GPa
@Strain 0.500 %,
Temperature 23.0 °C		 727.8 ksi
@Strain 0.500 %,
Temperature 73.4 °F		 DAM; ISO 11403-1 -2
  5.04348 GPa
@Strain 2.30 %,
Temperature 0.000 °C		 731.506 ksi
@Strain 2.30 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  5.232 GPa
@Strain 2.50 %,
Temperature -40.0 °C		 758.8 ksi
@Strain 2.50 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  5.24545 GPa
@Strain 1.10 %,
Temperature 0.000 °C		 760.800 ksi
@Strain 1.10 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  5.35882 GPa
@Strain 1.70 %,
Temperature 0.000 °C		 777.243 ksi
@Strain 1.70 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  5.56667 GPa
@Strain 1.20 %,
Temperature 0.000 °C		 807.390 ksi
@Strain 1.20 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  5.575 GPa
@Strain 2.00 %,
Temperature -40.0 °C		 808.6 ksi
@Strain 2.00 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  5.62 GPa
@Strain 0.500 %,
Temperature 0.000 °C		 815 ksi
@Strain 0.500 %,
Temperature 32.0 °F		 50%RH; ISO 11403-1 -2
  5.62222 GPa
@Strain 0.900 %,
Temperature 0.000 °C		 815.447 ksi
@Strain 0.900 %,
Temperature 32.0 °F		 DAM; ISO 11403-1 -2
  5.80526 GPa
@Strain 1.90 %,
Temperature -40.0 °C		 841.995 ksi
@Strain 1.90 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  5.90667 GPa
@Strain 1.50 %,
Temperature -40.0 °C		 856.703 ksi
@Strain 1.50 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  6.19 GPa
@Strain 1.00 %,
Temperature -40.0 °C		 898 ksi
@Strain 1.00 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  6.23333 GPa
@Strain 1.20 %,
Temperature -40.0 °C		 904.082 ksi
@Strain 1.20 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
  6.28 GPa
@Strain 0.500 %,
Temperature -40.0 °C		 911 ksi
@Strain 0.500 %,
Temperature -40.0 °F		 50%RH; ISO 11403-1 -2
  6.56 GPa
@Strain 0.500 %,
Temperature -40.0 °C		 951 ksi
@Strain 0.500 %,
Temperature -40.0 °F		 DAM; ISO 11403-1 -2
Izod Impact, Notched (ISO)  4.00 kJ/m² 1.90 ft-lb/in² 50%RH; ISO 180/1A
  4.50 kJ/m² 2.14 ft-lb/in² DAM; ISO 180/1A
   3.00 kJ/m²
@Temperature -30.0 °C		 1.43 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 180/1A
  3.00 kJ/m²
@Temperature -40.0 °C		 1.43 ft-lb/in²
@Temperature -40.0 °F		 50%RH; ISO 180/1A
  4.50 kJ/m²
@Temperature -40.0 °C		 2.14 ft-lb/in²
@Temperature -40.0 °F		 DAM; ISO 180/1A
  4.50 kJ/m²
@Temperature -30.0 °C		 2.14 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 180/1A
Izod Impact, Unnotched (ISO)  40.0 kJ/m² 19.0 ft-lb/in² DAM; ISO 180/1U
  55.0 kJ/m² 26.2 ft-lb/in² 50%RH; ISO 180/1U
   28.0 kJ/m²
@Temperature -30.0 °C		 13.3 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 180/1U
  35.0 kJ/m²
@Temperature -30.0 °C		 16.7 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 180/1U
Charpy Impact Unnotched  4.00 J/cm² 19.0 ft-lb/in² DAM; ISO 179/1eU
  7.00 J/cm² 33.3 ft-lb/in² 50%RH; ISO 179/1eU
   3.00 J/cm²
@Temperature -30.0 °C		 14.3 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eU
  4.00 J/cm²
@Temperature -30.0 °C		 19.0 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eU
Charpy Impact, Notched  0.500 J/cm² 2.38 ft-lb/in² DAM; ISO 179/1eA
  0.600 J/cm² 2.86 ft-lb/in² 50%RH; ISO 179/1eA
   0.400 J/cm²
@Temperature -40.0 °C		 1.90 ft-lb/in²
@Temperature -40.0 °F		 50%RH; ISO 179/1eA
  0.400 J/cm²
@Temperature -30.0 °C		 1.90 ft-lb/in²
@Temperature -22.0 °F		 50%RH; ISO 179/1eA
  0.450 J/cm²
@Temperature -40.0 °C		 2.14 ft-lb/in²
@Temperature -40.0 °F		 DAM; ISO 179/1eA
  0.450 J/cm²
@Temperature -30.0 °C		 2.14 ft-lb/in²
@Temperature -22.0 °F		 DAM; ISO 179/1eA
Tensile Creep Modulus, 1 hour  3300 MPa
@Time 3600 sec		 479000 psi
@Time 1.00 hour		 50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours  2200 MPa
@Time 3.60e+6 sec		 319000 psi
@Time 1000 hour		 50%RH; ISO 899-1
 
Electrical Properties Metric English Comments
Volume Resistivity  >= 1.00e+15 ohm-cm >= 1.00e+15 ohm-cm DAM; IEC 60093
Surface Resistance  1.00e+15 ohm 1.00e+15 ohm 50%RH; IEC 60093
Dielectric Constant    3.2
@Frequency 1.00e+6 Hz		 3.2
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
  3.9
@Frequency 100 Hz		 3.9
@Frequency 100 Hz		 DAM; IEC 60250
Dielectric Strength  25.0 kV/mm 635 kV/in DAM; IEC 60243-1
Dissipation Factor    0.013
@Frequency 100 Hz		 0.013
@Frequency 100 Hz		 DAM; IEC 60250
  0.015
@Frequency 1.00e+6 Hz		 0.015
@Frequency 1.00e+6 Hz		 DAM; IEC 60250
 
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow  40.0 µm/m-°C 22.2 µin/in-°F DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow  96.0 µm/m-°C 53.3 µin/in-°F DAM; ISO 11359-1/-2
Melting Point  262 °C 504 °F DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)  258 °C 496 °F DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)  238 °C 460 °F DAM; ISO 75-1/-2
Vicat Softening Point  205 °C 401 °F DAM; 50°C/h 50N; ISO 306
Glass Transition Temp, Tg  80.0 °C 176 °F DAM; 10°C/min; ISO 11357-1/-2
Flammability, UL94    HB
@Thickness 1.50 mm		 HB
@Thickness 0.0591 in		 DAM; IEC 60695-11-10
  HB
@Thickness 0.700 mm		 HB
@Thickness 0.0276 in		 DAM; IEC 60695-11-10
Flame Spread  27 mm/min
@Thickness 1.00 mm		 1.1 in/min
@Thickness 0.0394 in		 ISO 3795 (FMVSS 302)
Oxygen Index  24 % 24 % DAM; ISO 4589-1/-2
 
Descriptive Properties
Additives Lubricants  
  Release agent  
Delivery form Pellets  
Emission of organic compounds 6 µgC/g VDA 277
Part Marking Code >PA66-GF13< ISO 11469
Processing Injection Moulding  
Regional Availability Asia Pacific  
  Europe  
  Global  
  Near East/Africa  
  North America  
  South and Central America  
Resin Identification PA66-GF13
有很多超越金属和涂装的优点:零件重量较轻，较易处理，运输成本较低。它们的装配简便，制造成本较低，并且较不会受到撞凹，割损和刮伤。为了标识或美观目的，一些材料可被预先染色，避免费时且昂贵的两次着色加工。
 
颗粒01
上海松翰塑化科技有限公司，供应原料，品质真实,物实价廉。
PA6T,46,9T、PC、PC/ABS、PBT、ABS、PPA、PPS、POM、PMMA、TPE、PPO、LCP液晶聚合物。
欢迎各位客户前来咨询：
联系人： 夏先生  
手  机：13501802636   
QQ    ：205730283  
邮 箱 ：205730283@qq.com 
 

转载请注明: 转自中国塑胶原料之家 http://www.su-jiao.com/news/

本文链接: http://www.su-jiao.com/news/show-25476.html

免责声明: 本文 PA66 70G13L NC010 耐磨性 仅代表作者个人观点，中国塑胶原料之家无关。中国塑胶原料之家网所转载的内容，其版权均由原作者和资料提供方所拥有！如因作品版权问题需要处理，请与我们联络

该类别其他资讯信息

塑胶原料之家，专业塑料网站、原料报价网站，免费发布塑胶供求信息。塑胶原料之家为您提供塑料供应、塑料求购、塑料行情、塑料展会、塑料原料资讯服务。

2008-2015 塑料|塑胶原料|物性表大全|UL黄卡|SGS报告查询|最新价格--塑胶原料之家

沪ICP备15027283号-4