- 吸水率 [%]: 0.1
- 缺口冲击强度: 2.56
- 拉伸强度 [MPa]: 134.0
- 弯曲模量 [MPa]: 6.21
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.26 g/cc | 1.26 g/cc | Method A; ASTM D792 |
| Water Absorption | 0.10 % | 0.10 % | at 24 hrs; ASTM D570 |
| Linear Mold Shrinkage | 0.0010 - 0.0020 cm/cm | 0.0010 - 0.0020 in/in | ASTM D955 |
| Linear Mold Shrinkage, Transverse | 0.0060 - 0.0070 cm/cm | 0.0060 - 0.0070 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 134 MPa | 19400 psi | ASTM D638 |
| Tensile Strength, Yield | 134 MPa | 19400 psi | ASTM D638 |
| Elongation at Break | 6.2 % | 6.2 % | ASTM D638 |
| Elongation at Yield | 5.3 % | 5.3 % | ASTM D638 |
| Tensile Modulus | 7.38 GPa | 1070 ksi | ASTM D638 |
| Flexural Strength | 193 MPa | 28000 psi | ASTM D790 |
| Flexural Modulus | 6.21 GPa | 901 ksi | ASTM D790 |
| Izod Impact, Notched | 2.56 J/cm @Thickness 3.18 mm | 4.80 ft-lb/in @Thickness 0.125 in | ASTM D256 |
| Izod Impact, Unnotched | 14.3 J/cm @Thickness 3.18 mm | 26.8 ft-lb/in @Thickness 0.125 in | ASTM D256 |
| Izod Impact, Notched (ISO) | 25.3 kJ/m² | 12.0 ft-lb/in² | ISO 180 |
| Izod Impact, Unnotched (ISO) | 87.8 kJ/m² | 41.8 ft-lb/in² | ISO 180 |
| Falling Dart Impact | 16.7 J | 12.3 ft-lb | ASTM D3763 |
| Impact Test | 6.72 J | 4.96 ft-lb | Multi-Axial Instrumented Impact Energy; ISO 6603-2 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 34.0 µm/m-°C @Temperature 20.0 °C | 18.9 µin/in-°F @Temperature 68.0 °F | TMA; ASTM E831 |
| CTE, linear, Transverse to Flow | 99.0 µm/m-°C @Temperature 20.0 °C | 55.0 µin/in-°F @Temperature 68.0 °F | TMA; ASTM E831 |
| Deflection Temperature at 1.8 MPa (264 psi) | 178 °C | 352 °F | Unannealed; ASTM D648 |
| Processing Properties | Metric | English | Comments |
| Melt Temperature | 227 - 260 °C | 441 - 500 °F | |
| Mold Temperature | 43.3 - 51.7 °C | 110 - 125 °F | |
| Drying Temperature | 82.2 °C | 180 °F | |
| Dry Time | 4 hour | 4 hour | |
| Moisture Content | 0.15 % | 0.15 % | Suggested |
| Back Pressure | 0.172 - 0.345 MPa | 24.9 - 50.0 psi | |