- 密度 [g/cm3]: 1.28
- 吸水率 [%]: 0.18
- 缺口冲击强度: 23.0
- 拉伸强度 [MPa]: 117.0
- 断裂伸长率 [%]: 169
- 弯曲模量 [MPa]: 5.60
- 热变形温度 [℃]: 186.0
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.28 g/cc | 0.0462 lb/in³ | ISO 1183 |
| Water Absorption | 0.18 % @Time 86400 sec | 0.18 % @Time 24.0 hour | ISO 62-1 |
| Linear Mold Shrinkage, Flow | 0.0010 - 0.0030 cm/cm | 0.0010 - 0.0030 in/in | SABIC Method |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength at Break | 116 MPa | 16800 psi | 5 mm/min; ISO 527 |
| Tensile Strength, Yield | 117 MPa | 17000 psi | 5 mm/min; ISO 527 |
| Elongation at Yield | 6.0 % | 6.0 % | 5 mm/min; ISO 527 |
| Tensile Modulus | 7.10 GPa | 1030 ksi | 1 mm/min; ISO 527 |
| Flexural Yield Strength | 169 MPa | 24500 psi | 2 mm/min; ISO 178 |
| Flexural Modulus | 5.60 GPa | 812 ksi | 2 mm/min; ISO 178 |
| Izod Impact, Notched (ISO) | 23.0 kJ/m² | 10.9 ft-lb/in² | 80*10*4; ISO 180/1A |
| Izod Impact, Unnotched (ISO) | 95.0 kJ/m² | 45.2 ft-lb/in² | 80*10*4; ISO 180/1U |
| Thermal Properties | Metric | English | Comments |
| CTE, linear, Parallel to Flow | 24.0 µm/m-°C @Temperature 23.0 - 60.0 °C | 13.3 µin/in-°F @Temperature 73.4 - 140 °F | ISO 11359-2 |
| CTE, linear, Transverse to Flow | 150 µm/m-°C @Temperature 23.0 - 60.0 °C | 83.3 µin/in-°F @Temperature 73.4 - 140 °F | ISO 11359-2 |
| Deflection Temperature at 0.46 MPa (66 psi) | 186 °C | 367 °F | Flatw 80*10*4 sp=64mm; ISO 75/Bf |
| Deflection Temperature at 1.8 MPa (264 psi) | 173 °C | 343 °F | Flatw 80*10*4 sp=64mm; ISO 75/Af |